Civil 3D Tutorial 3: Data Shortcuts

00:05:43
https://www.youtube.com/watch?v=FoQAn40EucI

Zusammenfassung

TLDRWannan koyarwar tana nuna yadda ake amfani da Civil 3D data shortcuts don yin nuni da kuma sarrafa abubuwan C3D tsakanin zane-zane. An fara tare da ƙasa mai gado wanda aka riga aka samu daga wani darasi na baya. Ana amfani da data shortcuts don tsara salon ƙasa mai gado a zane na zane, yana bamu damar samun bayanan da za a iya amfani da su don wurin da muka nufa. Koyarwar ta bayyana yadda ake saita fayil ɗin aiki na data shortcuts da kuma yadda ake ƙirƙirar 'data shortcode project folder'. Ana gargaɗi da kauce wa shiga tsarin fayil na '_shortcuts folder' don kada a yi ɓatawa. Bayan saita fayil ɗin aiki, zane zai iya yin nuni da ƙasa a cikin wasu zane-zane ta hanyar bayanan bayanan bayanai da aka lissafa. Mahimmanci shine tabbatar fayil ɗin da aka zaɓa ya dace da aikin da ake yi.

Mitbringsel

  • 📂 Koyon yadda ake amfani da 'data shortcuts' a C3D don nuni tsakanin zane-zane.
  • ⚠️ Kiyaye '_shortcuts folder' daga gyara ko ƙari.
  • 🗂 Saita fayil ɗin aiki na 'data shortcuts' sama da aikin.
  • 🔀 Zaɓan salon ƙasa a cikin zane-zanen nufin.
  • 🔗 Harhaɗa fayil ɗin 'data shortcut' daidai kafin fara wani aikin lag bara.
  • 🎯 Yin amfani da abu daga wani zane don amfani da shi cikin zane da ake nufi.

Zeitleiste

  • 00:00:00 - 00:05:43

    Wannan koyarwar akan hanyoyin bayanai na Civil 3D yana dauka cewa kuna da wurin ƙasa na zamani da aka ƙirƙira a darasin da ya gabata. Manufar hanyoyin bayanai shine ba da damar masu amfani da abubuwa na Civil 3D tsakanin zane-zane. Ya bambanta da XRFS, wanda zai ba ku damar ganin layi ne kawai daga wani zanen, a nan za ku iya amfani da shi don abubuwan Civil 3D kamar yanke tambaya da sarrafawa salon yanayin EG a cikin zanen kayayyakin ku.

Mind Map

Mind Map

Häufig gestellte Fragen

  • Menene bukatar data shortcuts a Civil 3D?

    Data shortcuts suna bamu damar nuna abubuwan C3D tsakanin zane-zane don sarrafa kowane ƙasa, profiles, da sauransu.

  • Ta yaya ake kafa mahimmin fayil na "data shortcuts"?

    Za a danna-dama kan data shortcuts, sannan a zaɓi 'set working folder' don saita fayil ɗin aiki na data shortcuts sama da aikin.

  • Me yasa yakamata a kiyaye "shortcuts folder" a cikin tsarin fayil?

    Ana buƙatar tsarin fayil mai suna "_shortcuts folder" don aikin aikace-aikacen kuma bai kamata a gyara ko kara komai a ciki ba.

  • Mene ne za a yi idan aka kawo zane mara dadi?

    A cire shi daga zane ta hanyar zaɓar shi a cikin sashin 'surfaces' ko ta hanyar danna kan buɗaɗɓa reason ya nuna shu.

  • Menene mahimmancin saita fayil na "data shortcut" daidai kafin fara wani aikin?

    Dole ne a tabbatar da cewa fayil na data shortcut ya dace da aikin da ake yi don guje wa rashin daidaituwa.

Weitere Video-Zusammenfassungen anzeigen

Erhalten Sie sofortigen Zugang zu kostenlosen YouTube-Videozusammenfassungen, die von AI unterstützt werden!
Untertitel
en
Automatisches Blättern:
  • 00:00:00
    this tutorial on civil 3D data shortcuts
  • 00:00:02
    assumes you've already got an existing
  • 00:00:03
    ground surface such as the one you see
  • 00:00:05
    here which was created in the previous
  • 00:00:06
    tutorial the purpose of data shortcuts
  • 00:00:09
    is to allow you to reference Cil 3D
  • 00:00:11
    objects between drawings it allows us to
  • 00:00:13
    do things like keep our existing ground
  • 00:00:14
    surface in one drawing but use it in our
  • 00:00:17
    design drawing for surface profiles
  • 00:00:19
    volumes Etc xrfs would allow you to see
  • 00:00:23
    line workk from another drawing but you
  • 00:00:25
    wouldn't be able to use it for Cil 3D
  • 00:00:27
    functionality the data shortcuts allow
  • 00:00:29
    you to control the style of the EG
  • 00:00:31
    surface in your design drawing as well
  • 00:00:33
    as use it for targeting the interface
  • 00:00:35
    for data shortcuts is in the prospector
  • 00:00:37
    tab of tool space below the drawing area
  • 00:00:40
    you'll see data shortcuts the first
  • 00:00:42
    thing we need to do is set the data
  • 00:00:44
    shortcuts working folder and the project
  • 00:00:47
    we'll right click on data shortcuts and
  • 00:00:48
    say set working folder there's a number
  • 00:00:50
    of ways you can organize your data
  • 00:00:51
    shortcuts we're going to assume that
  • 00:00:53
    we're going to keep the shortcuts right
  • 00:00:55
    inside of our project so I'll set the
  • 00:00:56
    working folder one level above my
  • 00:00:59
    project so the p drive for
  • 00:01:01
    me and then I'll make a new data
  • 00:01:04
    shortcut project folder and I'm going to
  • 00:01:06
    make it exactly the same as my project
  • 00:01:08
    which
  • 00:01:09
    is
  • 00:01:13
    20161 what that's going to
  • 00:01:16
    do is set the data shortcut project
  • 00:01:41
    which is
  • 00:01:46
    20161 what that's going to do is set the
  • 00:01:48
    data shortcut project folder and
  • 00:01:52
    automatically in that folder structure
  • 00:01:55
    it's going to create this underscore
  • 00:01:56
    shortcuts folder which the program needs
  • 00:01:58
    for the data shortcuts to function
  • 00:02:00
    correctly you should never put anything
  • 00:02:02
    in this underscore shortcuts folder uh
  • 00:02:04
    or do anything to the files inside of it
  • 00:02:06
    they're just XML files that the program
  • 00:02:09
    uses to organize the data
  • 00:02:13
    shortcuts once I've got that set what
  • 00:02:16
    I'll want to do is save the drawing and
  • 00:02:19
    then right click on data shortcuts and
  • 00:02:21
    say create data shortcuts that will
  • 00:02:25
    allow the existing ground surface we've
  • 00:02:27
    created to be available to any other
  • 00:02:30
    drawings that reference this data
  • 00:02:31
    shortcut
  • 00:02:33
    project if you don't save first what
  • 00:02:35
    happens is when I go to create data
  • 00:02:40
    shortcuts so I'll right click data
  • 00:02:42
    shortcuts and say create data shortcuts
  • 00:02:45
    check my EG surface and say
  • 00:02:55
    okay now underneath data shortcuts
  • 00:02:57
    you'll see surfaces EG
  • 00:03:00
    you also notice the other kinds of
  • 00:03:02
    objects we can create data shortcuts for
  • 00:03:04
    alignments and then therefore profiles
  • 00:03:07
    pipe networks and then new for 2017 uh
  • 00:03:15
    corridors now that that data shortcut
  • 00:03:17
    has been made
  • 00:03:18
    available we can close this
  • 00:03:24
    drawing start a new drawing
  • 00:03:30
    start by saving
  • 00:03:40
    it and now we're ready to reference or
  • 00:03:42
    data reference this EG surface that we
  • 00:03:45
    just made available so under data
  • 00:03:46
    shortcuts we'll go to surfaces EG
  • 00:03:48
    rightclick create
  • 00:03:51
    reference choose the style and we can
  • 00:03:53
    change the name if we'd like
  • 00:03:57
    to and there's the EG surface reference
  • 00:04:01
    to in now when we look up in the
  • 00:04:04
    prospector area the drawing area and we
  • 00:04:05
    go to surfaces you'll see EG but it has
  • 00:04:07
    a little slightly different symbol
  • 00:04:09
    little arrow pointing up into the right
  • 00:04:11
    and that's to alert us to the fact that
  • 00:04:12
    this is a data referenced surface and if
  • 00:04:15
    we expand it you'll see there's no
  • 00:04:17
    definition okay and that's because the
  • 00:04:19
    definition of this EG surface is
  • 00:04:21
    actually in another drawing I want to
  • 00:04:24
    point out a mistake that's commonly made
  • 00:04:26
    let's say I brought in the wrong surface
  • 00:04:27
    maybe it's from the wrong project or
  • 00:04:28
    maybe it's just the wrong surface so I
  • 00:04:30
    want to get rid of it I don't want to
  • 00:04:32
    right click under data shortcuts here
  • 00:04:33
    and say remove removing the surface from
  • 00:04:36
    the data shortcuts gets rid of the XML
  • 00:04:38
    file inside of that underscore data
  • 00:04:40
    shortcuts folder I showed you we want to
  • 00:04:43
    get rid of it from the drawing so up
  • 00:04:45
    here under surfaces EG we want to get
  • 00:04:46
    rid of that so I could either right
  • 00:04:49
    click here and say delete or I could
  • 00:04:50
    just select it on the screen and hit
  • 00:04:53
    delete and that'll take it out of this
  • 00:04:56
    drawing so I'll bring it back in one
  • 00:04:57
    more time
  • 00:05:01
    and
  • 00:05:04
    save now these two drawings design. DWG
  • 00:05:07
    and my existing ground drawing are both
  • 00:05:09
    Associated to this project which means
  • 00:05:11
    that when I reopen these drawings in two
  • 00:05:12
    months or a year it should automatically
  • 00:05:14
    set my project folder to p and the
  • 00:05:17
    project but I do need to be aware that
  • 00:05:18
    if I go to work on another
  • 00:05:20
    project start a new project or a project
  • 00:05:23
    that hasn't used data shortcuts it may
  • 00:05:25
    not be set to the correct project down
  • 00:05:27
    here so you always want to check this
  • 00:05:29
    data shortcut
  • 00:05:30
    path and make sure that you're in the
  • 00:05:32
    project you expect to be in before
  • 00:05:33
    creating data shortcuts or data
  • 00:05:35
    references now in the next tutorial
  • 00:05:37
    we'll take our existing ground surface
  • 00:05:39
    and begin to create alignments and
  • 00:05:41
    profiles
Tags
  • Civil 3D
  • data shortcuts
  • zane-zane
  • ƙasa
  • C3D
  • salon ƙasa
  • aiki
  • fayil ɗin aiki