How to adjust flames on commercial stove burner | How to adjust flames on stoves

00:02:50
https://www.youtube.com/watch?v=XJYU-s3ctLI

Zusammenfassung

TLDRThe video from "Curry Kitchen" discusses a common issue faced by the speaker with their newly installed 10 burner range with low gas flames, which couldn't be fixed by hired plumbers. Even after spending $400 to $500, the problem was unsolved. The plumbers advised changing the equipment, saying the gas pressure was optimal. Instead of replacing, the speaker found a solution by manually increasing the size of the holes in the gas outlet using a screwdriver, which successfully enhanced the flame size. This approach demonstrates an effective and cost-saving solution to the issue.

Mitbringsel

  • 🔥 The gas flame on newly bought kitchen stoves was too low.
  • 🛠️ Professional help was inadequate despite costing $400 to $500.
  • 🔧 A manual fix involved enlarging holes in gas outlets to increase the flame.
  • 💡 The plumber suggested replacing equipment based on gas pressure checks.
  • 💵 Cost-saving strategy by modifying existing equipment instead of replacing.
  • 📍 The scenario took place in a restaurant named Curry Kitchen.
  • 👨‍🍳 DIY approach proved effective over professional advice.
  • 🚫 Equipment replacement was avoided despite suggestions to do so.
  • 👌 The manual modification successfully increased the flame size.
  • ⚒️ Basic tools like a screwdriver were used for the alteration.

Zeitleiste

  • 00:00:00 - 00:02:50

    开始时主持人展示了一个炉具，说明火焰很低，并提到他为诊断问题花费了一些金钱但未能解决。他购买了一套新的10灶具和一个汤锅，但气压仍然很低。即使专业管道工建议更换设备，他仍然想找到解决方案以节省成本。在尝试各种方法后，他展示了如何通过调节炉具上的孔位大小来增加火焰。他拿出螺丝刀，夸大了孔洞，从而雪泥小巧改变火焰强度，并取得了成功。

Mind Map

Video-Fragen und Antworten

  • What is the main problem discussed in the video?

    The main problem is that the gas flame on the stove is very low.

  • What solution did the video provider find to fix the low flame?

    The solution involved making the gas outlet holes bigger to increase the flame size.

  • Why was the equipment not replaced?

    The equipment was not replaced because it was recently purchased and the provider preferred to adjust it manually instead of incurring additional costs.

  • How much money was spent on professional help to fix the problem?

    Around 400 to 500 dollars were spent on professional help without success.

  • What part of the equipment did they adjust to solve the problem?

    They adjusted the holes in the gas outlets to make them bigger.

  • What method did the plumber suggest to solve the issue?

    The plumber suggested changing the equipment as the gas pressure was perfect.

  • What is the venue where the problem occurs?

    The problem occurs in a restaurant called Curry Kitchen.

  • Why was professional help unsuccessful in solving the issue?

    Professional help couldn't solve the problem because they assumed the equipment needed replacement.

  • What tool was used to adjust the gas equipment?

    A screwdriver was used to adjust the holes in the gas outlets.

Weitere Video-Zusammenfassungen anzeigen

Erhalten Sie sofortigen Zugang zu kostenlosen YouTube-Videozusammenfassungen, die von AI unterstützt werden!
Untertitel
en
Automatisches Blättern:
  • 00:00:00
    one you see the flame on this
  • 00:00:03
    and you see the flame on this this one i
  • 00:00:05
    adjusted just now
  • 00:00:08
    see the difference guys
  • 00:00:11
    uh welcome to curry kitchen
  • 00:00:15
    hello guys welcome to curry kitchen i am
  • 00:00:17
    opening a restaurant so i got here
  • 00:00:20
    these nice 10 burner range
  • 00:00:23
    and plus i have one stock part but the
  • 00:00:26
    the gas plane is coming is very low very
  • 00:00:29
    low as i will show you
  • 00:00:31
    this one slow
  • 00:00:35
    but i call plumber i call everybody
  • 00:00:38
    i spend like a 400 500 bucks they
  • 00:00:40
    couldn't find the
  • 00:00:42
    way how to fix this but i figured out
  • 00:00:44
    the
  • 00:00:45
    how to fix this one though but still
  • 00:00:48
    i need to figure out the start part
  • 00:00:51
    range i don't know how to fix that one
  • 00:00:53
    so this one i'm going to fix you how to
  • 00:00:55
    get a get the flame a little bit higher
  • 00:00:58
    even the plumber he couldn't do it he's
  • 00:01:00
    just trying to look at the regulator
  • 00:01:02
    behind and he said gas pressure is
  • 00:01:05
    coming very perfect
  • 00:01:07
    you have to just change the equipment
  • 00:01:09
    that's what he said
  • 00:01:10
    i cannot change the equipment now like i
  • 00:01:12
    bought it already so
  • 00:01:14
    let me show you guys guys like how i fix
  • 00:01:16
    it clean i pull it out this one
  • 00:01:22
    then second thing you have to take it
  • 00:01:24
    out these
  • 00:01:26
    are connected to the the gas uh pipe
  • 00:01:29
    over there
  • 00:01:30
    so and behind this you will see the
  • 00:01:35
    screw like that
  • 00:01:36
    these have the holes you see the holes
  • 00:01:38
    you can make the holes bigger
  • 00:01:40
    or smaller all right let's do this one
  • 00:01:43
    get the screwdriver
  • 00:02:00
    and we're going to make slightly the
  • 00:02:02
    hole bigger and we're going to see
  • 00:02:05
    just slightly the whole we're gonna make
  • 00:02:07
    bigger
  • 00:02:08
    and
  • 00:02:12
    then we are going to
  • 00:02:22
    yeah and we'll see the difference okay
  • 00:02:27
    and we're gonna put it back that one
  • 00:02:30
    same way
  • 00:02:32
    let's see
  • 00:02:36
    make sure it goes to here and perfectly
  • 00:02:39
    fit
  • 00:02:41
    and put it back and now we're gonna see
  • 00:02:44
    the flame
  • 00:02:45
    change look at that wow
  • 00:02:48
    this is bigger already
Tags
  • kitchen
  • gas flame
  • repair
  • DIY
  • Curry Kitchen
  • cost-saving
  • gas equipment
  • restaurant