Fuente de Alimentación (5v, 12v) (Simulación) - Tutorial Proteus | D&R Tutoriales

00:06:18
https://www.youtube.com/watch?v=MziUe5OEtGc

Ringkasan

TLDREste video enseña a crear una fuente de voltaje con el software Proteus, utilizando componentes como un transformador, alternador, puente de diodos, capacitor electrolítico y un regulador 7812. Se explican los pasos para seleccionar y conectar los componentes, ajustar parámetros y verificar el funcionamiento del circuito con un voltímetro, mostrando una salida de 12 V. Se anima a los espectadores a suscribirse y dar like al video.

Takeaways

  • 🔌 Aprende a crear una fuente de voltaje en Proteus
  • 🛠️ Selecciona componentes como transformador y alternador
  • ⚡ Ajusta la amplitud y frecuencia del transformador
  • 🔄 El puente de diodos convierte AC a DC
  • 🧩 El capacitor actúa como filtro en el circuito
  • 📏 El circuito 7812 proporciona un máximo de 12 V
  • 🔍 Verifica el funcionamiento con un voltímetro
  • 👍 Suscríbete para más contenido de electrónica
  • 💡 Explora otros circuitos como el 7805
  • 🎥 Disfruta del proceso de simulación en Proteus

Garis waktu

  • 00:00:00 - 00:06:18

    En este video, se muestra cómo crear una fuente de voltaje utilizando el software Proteus. Se comienza seleccionando los componentes necesarios, como un transformador, un alternador, un puente de diodos, un capacitor electrolítico y un circuito regulador 7812. Se realizan conexiones entre los componentes, ajustando parámetros como la amplitud y la capacitancia. El circuito rectifica la corriente alterna a corriente continua, y se verifica su funcionamiento utilizando un voltímetro, que muestra una salida de 12 V. Al final, se invita a los espectadores a suscribirse y dar like al video.

Peta Pikiran

Video Tanya Jawab

  • ¿Qué software se utiliza para crear la fuente de voltaje?

    Se utiliza el software Proteus.

  • ¿Cuáles son los componentes principales utilizados en el circuito?

    Transformador, alternador, puente de diodos, capacitor electrolítico y circuito 7812.

  • ¿Qué voltaje se puede obtener con el circuito 7812?

    Se puede obtener un máximo de 12 V.

  • ¿Cómo se verifica el funcionamiento de la fuente de voltaje?

    Se utiliza un voltímetro DC para comprobar la salida.

  • ¿Qué función tiene el capacitor electrolítico en el circuito?

    Actúa como un filtro.

  • ¿Qué otros circuitos similares se mencionan?

    Se menciona el circuito 7805 que proporciona 5 V.

Lihat lebih banyak ringkasan video

Dapatkan akses instan ke ringkasan video YouTube gratis yang didukung oleh AI!
Teks
en
Gulir Otomatis:
  • 00:00:12
    In this video we show you how to create a voltage source using
  • 00:00:17
    the Proteus Software, before all Don´t forget hit that suscribe and like button
  • 00:00:22
    for don't miss more content like this Now, we are going to start
  • 00:00:29
    The first step will be to click on this button with the letter "P" for
  • 00:00:34
    select all the components that we will use to do our voltaje source
  • 00:00:38
    Typing the first component as "Transformer"
  • 00:00:46
    In this case we are going to use This options called
  • 00:00:50
    "TRAN-2P3S" Well, click on OK
  • 00:00:59
    And we put it anywhere
  • 00:01:03
    Now, we typing the second component whom is called "ALTERNATOR"
  • 00:01:11
    Click on OK and we put it close to other
  • 00:01:16
    Then, we look for the component "BRIDGE"
  • 00:01:25
    Will be this and click on OK
  • 00:01:30
    We put it here
  • 00:01:35
    Next will be the Electrolytic Capacitor
  • 00:01:40
    Whom is called with the name "CAP-ELEC"
  • 00:01:46
    click on OK and put it here
  • 00:01:52
    Finally Look for the circuit that we will use
  • 00:01:58
    We will find as "7812"
  • 00:02:07
    We put it here, furthermore we add a voltage source
  • 00:02:14
    For this case, just use "GROUND"
  • 00:02:18
    [Músic]
  • 00:02:22
    Now,we are going to do the joints
  • 00:02:25
    This component will do the job as alternanting current, so
  • 00:02:31
    we conect with the transformer like this way
  • 00:02:39
    It's important do that
  • 00:02:43
    Double-click on the component And change the amplitude to 127 V
  • 00:02:52
    Frequency we type "60 Hz"
  • 00:02:58
    Then, we are going to do the joints exactly like this
  • 00:03:03
    [Music] [Doing this joints and place the component for best way for you]
  • 00:03:47
    [Music]
  • 00:03:52
    Double-click on the capacitor and change the Capacitante to "2200uF"
  • 00:04:03
    Click on OK And finally, doing this joint
  • 00:04:13
    Well, basically the funtion of this circuit is Rectifiering 127 V,
  • 00:04:19
    first through the Diode Brigde that change the current
  • 00:04:24
    from alternanting current to direct current The electrolytic capacitor
  • 00:04:29
    works like filter, too. The circuit 7812 receives
  • 00:04:36
    the signal by the input called "VI" The pin GND must be connect to GROUND
  • 00:04:46
    The pin 3 called "VO" will be the Ouput Voltage, due to we are using
  • 00:04:52
    a 7812, we only can get a maximun of 12 V We can look for other circuits that works like 7812
  • 00:05:01
    For example, here the software have the 7805 That can provides only 5 V of output voltage
  • 00:05:08
    And more another circuits similar like this rectifier
  • 00:05:13
    Now, we are going to check that our voltage source is working ok
  • 00:05:18
    Going to the section of "INSTRUMENTS"
  • 00:05:23
    And we click on "DC VOLTMETER"
  • 00:05:33
    And we put it here We do a joint beetwen these components
  • 00:05:44
    After that, we run the simulation
  • 00:05:51
    and as we can see our voltmeter shows us 12 V
  • 00:05:59
    And this is a easy way to make a voultage source using Proteus
  • 00:06:05
    We hope you liked the video Don't forget hit on like button
  • 00:06:09
    and suscribe to channel for more content like this
  • 00:06:15
    It' all for today, see you later friends
Tags
  • Proteus
  • fuente de voltaje
  • transformador
  • alternador
  • puente de diodos
  • capacitor electrolítico
  • circuito 7812
  • voltímetro
  • simulación
  • electrónica