How to adjust flames on commercial stove burner | How to adjust flames on stoves

00:02:50
https://www.youtube.com/watch?v=XJYU-s3ctLI

Ringkasan

TLDRThe video from "Curry Kitchen" discusses a common issue faced by the speaker with their newly installed 10 burner range with low gas flames, which couldn't be fixed by hired plumbers. Even after spending $400 to $500, the problem was unsolved. The plumbers advised changing the equipment, saying the gas pressure was optimal. Instead of replacing, the speaker found a solution by manually increasing the size of the holes in the gas outlet using a screwdriver, which successfully enhanced the flame size. This approach demonstrates an effective and cost-saving solution to the issue.

Takeaways

  • 🔥 The gas flame on newly bought kitchen stoves was too low.
  • 🛠️ Professional help was inadequate despite costing $400 to $500.
  • 🔧 A manual fix involved enlarging holes in gas outlets to increase the flame.
  • 💡 The plumber suggested replacing equipment based on gas pressure checks.
  • 💵 Cost-saving strategy by modifying existing equipment instead of replacing.
  • 📍 The scenario took place in a restaurant named Curry Kitchen.
  • 👨‍🍳 DIY approach proved effective over professional advice.
  • 🚫 Equipment replacement was avoided despite suggestions to do so.
  • 👌 The manual modification successfully increased the flame size.
  • ⚒️ Basic tools like a screwdriver were used for the alteration.

Garis waktu

  • 00:00:00 - 00:02:50

    开始时主持人展示了一个炉具，说明火焰很低，并提到他为诊断问题花费了一些金钱但未能解决。他购买了一套新的10灶具和一个汤锅，但气压仍然很低。即使专业管道工建议更换设备，他仍然想找到解决方案以节省成本。在尝试各种方法后，他展示了如何通过调节炉具上的孔位大小来增加火焰。他拿出螺丝刀，夸大了孔洞，从而雪泥小巧改变火焰强度，并取得了成功。

Peta Pikiran

Video Tanya Jawab

  • What is the main problem discussed in the video?

    The main problem is that the gas flame on the stove is very low.

  • What solution did the video provider find to fix the low flame?

    The solution involved making the gas outlet holes bigger to increase the flame size.

  • Why was the equipment not replaced?

    The equipment was not replaced because it was recently purchased and the provider preferred to adjust it manually instead of incurring additional costs.

  • How much money was spent on professional help to fix the problem?

    Around 400 to 500 dollars were spent on professional help without success.

  • What part of the equipment did they adjust to solve the problem?

    They adjusted the holes in the gas outlets to make them bigger.

  • What method did the plumber suggest to solve the issue?

    The plumber suggested changing the equipment as the gas pressure was perfect.

  • What is the venue where the problem occurs?

    The problem occurs in a restaurant called Curry Kitchen.

  • Why was professional help unsuccessful in solving the issue?

    Professional help couldn't solve the problem because they assumed the equipment needed replacement.

  • What tool was used to adjust the gas equipment?

    A screwdriver was used to adjust the holes in the gas outlets.

Lihat lebih banyak ringkasan video

Dapatkan akses instan ke ringkasan video YouTube gratis yang didukung oleh AI!
Teks
en
Gulir Otomatis:
  • 00:00:00
    one you see the flame on this
  • 00:00:03
    and you see the flame on this this one i
  • 00:00:05
    adjusted just now
  • 00:00:08
    see the difference guys
  • 00:00:11
    uh welcome to curry kitchen
  • 00:00:15
    hello guys welcome to curry kitchen i am
  • 00:00:17
    opening a restaurant so i got here
  • 00:00:20
    these nice 10 burner range
  • 00:00:23
    and plus i have one stock part but the
  • 00:00:26
    the gas plane is coming is very low very
  • 00:00:29
    low as i will show you
  • 00:00:31
    this one slow
  • 00:00:35
    but i call plumber i call everybody
  • 00:00:38
    i spend like a 400 500 bucks they
  • 00:00:40
    couldn't find the
  • 00:00:42
    way how to fix this but i figured out
  • 00:00:44
    the
  • 00:00:45
    how to fix this one though but still
  • 00:00:48
    i need to figure out the start part
  • 00:00:51
    range i don't know how to fix that one
  • 00:00:53
    so this one i'm going to fix you how to
  • 00:00:55
    get a get the flame a little bit higher
  • 00:00:58
    even the plumber he couldn't do it he's
  • 00:01:00
    just trying to look at the regulator
  • 00:01:02
    behind and he said gas pressure is
  • 00:01:05
    coming very perfect
  • 00:01:07
    you have to just change the equipment
  • 00:01:09
    that's what he said
  • 00:01:10
    i cannot change the equipment now like i
  • 00:01:12
    bought it already so
  • 00:01:14
    let me show you guys guys like how i fix
  • 00:01:16
    it clean i pull it out this one
  • 00:01:22
    then second thing you have to take it
  • 00:01:24
    out these
  • 00:01:26
    are connected to the the gas uh pipe
  • 00:01:29
    over there
  • 00:01:30
    so and behind this you will see the
  • 00:01:35
    screw like that
  • 00:01:36
    these have the holes you see the holes
  • 00:01:38
    you can make the holes bigger
  • 00:01:40
    or smaller all right let's do this one
  • 00:01:43
    get the screwdriver
  • 00:02:00
    and we're going to make slightly the
  • 00:02:02
    hole bigger and we're going to see
  • 00:02:05
    just slightly the whole we're gonna make
  • 00:02:07
    bigger
  • 00:02:08
    and
  • 00:02:12
    then we are going to
  • 00:02:22
    yeah and we'll see the difference okay
  • 00:02:27
    and we're gonna put it back that one
  • 00:02:30
    same way
  • 00:02:32
    let's see
  • 00:02:36
    make sure it goes to here and perfectly
  • 00:02:39
    fit
  • 00:02:41
    and put it back and now we're gonna see
  • 00:02:44
    the flame
  • 00:02:45
    change look at that wow
  • 00:02:48
    this is bigger already
Tags
  • kitchen
  • gas flame
  • repair
  • DIY
  • Curry Kitchen
  • cost-saving
  • gas equipment
  • restaurant