Learning Network Cable Management - A Small Business Open Frame Rack Build

00:17:22
https://www.youtube.com/watch?v=KkIgYbLuA6o

Sintesi

TLDRDerek from TCI provides a detailed walkthrough of installing and managing network cables in a small office setup. He describes terminating Cat6 wires, managing 73 cables of different colors, and using tools like velcro, cable comb, and chase pipes to organize and lead cables from the ceiling to a frame on a backboard. Throughout the process, emphasis is placed on maintaining professionalism and aesthetics by using appropriate cable management methods, including labeling and using structural aids like chase pipes to make entry paths look intentional. Derek also demonstrates installing rack components, ensuring neatness through velcro, saddle straps, and efficient usage of rack space with cable managers. He stresses safety and proper tieing techniques to avoid cable damage and concludes by ensuring the setup aligns aesthetically with planned equipment positioning.

Punti di forza

  • 📋 Labeling cables is essential for organization.
  • 🚀 Chase pipes can improve aesthetics in cable management.
  • 🧩 Use velcro or cable combs for neat cable arrangements.
  • ⚒️ Be cautious with tool use to avoid unsafe practices.
  • 🔧 Secure racks and cables to ensure stability.
  • 🛠️ Cable managers hide slack and organize connections.
  • 🔒 Temporary velcro can assist during setup before finalizing cables.
  • 🔄 Install switches and routers as per plan for seamless operation.
  • 📐 Ensure all cables are aligned and not visible.
  • 🪛 Using the right tools aids in professional results.
  • 🎯 Follow planned diagrams for precise installations.
  • 🧹 Clean up post-installation to maintain workspace.

Linea temporale

  • 00:00:00 - 00:05:00

    Derek from TCI demonstrates network cable management by building infrastructure for a small office. The project includes terminating 73 categorized Cat6 cables. He retrieves cables left in the ceiling by installers, planning to install them on a backboard. Derek emphasizes installing chase pipes to organize entry from the plenum area and avoid unprofessional ceiling hole cutting. A chase pipe functions to maintain aesthetic integrity when transitioning cables through ceilings. He begins organizing cables on the ground by labeling and arranging them correctly, using a cable comb or hand and velcro for neat bundling.

  • 00:05:00 - 00:10:00

    Derek confronts the challenge of mounting an open frame for the client's rack, noting disadvantages like lack of cable management features. He secures cables temporarily to install the frame solo, using screws strategically for leveling. Post installation, Derek attaches patch panels based on a predefined plan, initially without additional elements for movement freedom during termination. He guides and bundles cables in groups for organizational ease, highlighting the utility of empty patch panel sockets for length management. Derek uses a beginner-friendly all-in-one crimp tool for terminations, favoring it for reduced errors, then secures the bundle using velcro and hides slack wires in the ceiling for a clean look. He employs saddle straps for strain relief in his cable bundling procedure.

  • 00:10:00 - 00:17:22

    After a break, Derek returns to install the equipment. He prioritizes switches, using lower rack screw holes for leveling and screws for weight support during setup. He encounters difficulty with the client's router but manages with a different approach. Derek then installs a 'neat patch' cable manager, utilizing its depth to conceal cable slack. He chooses a fiber patch cord over a DAC cable due to compatibility issues, completing patches to the initial and main panels. Derek's cable management results in a tidy rack with no visible unnecessary slack, ready for the client's IT department to finalize the setup with a UPS and internet provider installation, concluding his involvement in the video.

Mappa mentale

Video Domande e Risposte

  • What is the main topic of the video?

    The video teaches network cable management while setting up a small office.

  • How many Cat6 wires were used in the setup?

    Approximately 73 wires were used.

  • What is a chase pipe used for in cable management?

    A chase pipe helps create an entry path for cables from the ceiling to the lower space, making it look organized and professional.

  • Why is labeling important during cable setup?

    Labeling helps organize and manage cables during the installation, especially in a dynamic construction site.

  • What does the presenter use to organize cables?

    The presenter uses velcro and a cable comb to organize cables.

  • Why use a cable manager?

    A cable manager helps hide cable slack and maintain an organized appearance in network servers or open frames.

  • What kind of equipment did the presenter install on the rack?

    He installed patch panels, cable managers, switches, and a router.

  • How does the presenter ensure cable aesthetic?

    By securing cables with velcro and ensuring they are not visible outside of necessary connections.

  • What precautions are mentioned when using zip ties on cables?

    Ensure zip ties aren’t too tight as this could damage the cables.

  • What advice does the presenter give regarding equipment installation on the rack?

    Use screws below equipment rack ears to help hold the weight and ensure the equipment is level.

Visualizza altre sintesi video

Ottenete l'accesso immediato ai riassunti gratuiti dei video di YouTube grazie all'intelligenza artificiale!
Sottotitoli
en
Scorrimento automatico:
  • 00:00:01
    hey friends Derek from TCI here with
  • 00:00:04
    another video to help you learn network
  • 00:00:05
    cable management in this example we're
  • 00:00:08
    going to be building out a small office
  • 00:00:09
    let me show you the space that I'm
  • 00:00:12
    working in
  • 00:00:14
    we're pretty far along in construction
  • 00:00:15
    here I've been brought in near the end
  • 00:00:18
    to terminate all of the Cat6 wires that
  • 00:00:20
    the installers have left me in terms of
  • 00:00:23
    offices and end points we're looking at
  • 00:00:26
    about 25 people plus printers when the
  • 00:00:30
    installers did the cables for me the
  • 00:00:31
    grand total ended up being approximately
  • 00:00:33
    73 wires
  • 00:00:35
    they're of different colors for
  • 00:00:37
    different purposes because this is a
  • 00:00:39
    live construction site with different
  • 00:00:40
    trades coming and going the installers
  • 00:00:43
    have left all of the cables in the
  • 00:00:44
    ceiling for me to retrieve it will be my
  • 00:00:47
    job to bring these wires down the wall
  • 00:00:49
    and install them in a frame on this
  • 00:00:52
    backboard
  • 00:00:55
    after getting my tools together my first
  • 00:00:57
    order of business is to bring the wires
  • 00:00:59
    down from the ceiling I'm standing a
  • 00:01:01
    little high on this short ladder so when
  • 00:01:04
    you go through this same step make sure
  • 00:01:06
    you use an appropriately sized ladder I
  • 00:01:08
    was being lazy and unsafe this is not
  • 00:01:10
    something you want to replicate
  • 00:01:13
    once I have all the wires down out of
  • 00:01:15
    the ceiling I'm going to build something
  • 00:01:17
    called a Chase pipe this is meant to go
  • 00:01:20
    at the top of the backboard it's a four
  • 00:01:22
    inch pipe and I've got two of them the
  • 00:01:24
    goal here is to create an entry path
  • 00:01:26
    from the ceiling space called the plenum
  • 00:01:29
    area into the lower space
  • 00:01:36
    I don't like the look of ragged holes in
  • 00:01:39
    the ceiling tiles so I put these pipes
  • 00:01:41
    here before the ceiling Tradesman
  • 00:01:44
    arrives when he finds these pipes he
  • 00:01:47
    will cut an outline around his tiles so
  • 00:01:49
    that this fits
  • 00:01:51
    this is probably a good time to mention
  • 00:01:53
    that whenever I'm transitioning cables
  • 00:01:56
    from one space to another
  • 00:01:58
    I like to have something like a grommet
  • 00:02:00
    or a Chase pipe or other indicator that
  • 00:02:03
    I meant to make that hole it's usually
  • 00:02:06
    not my desire to take a knife and cut a
  • 00:02:08
    jagged hole out of the ceiling or drill
  • 00:02:11
    and penetrate drywall as much as
  • 00:02:13
    possible I make it look like I intended
  • 00:02:15
    to do that all along because I believe
  • 00:02:17
    that this increases the professionalism
  • 00:02:19
    of the final product
  • 00:02:22
    with the chase pipes installed I will
  • 00:02:25
    now begin to remove the tape on the Cat6
  • 00:02:27
    that the installers have left behind
  • 00:02:31
    hey friends you're probably wondering at
  • 00:02:32
    this point what do we do with all of
  • 00:02:34
    this well I did label them they're all
  • 00:02:37
    labeled but the realities of a
  • 00:02:40
    construction site are that you've got to
  • 00:02:42
    stay out of the way of the other
  • 00:02:43
    Tradesmen sometimes so these were run
  • 00:02:45
    more or less at random by different
  • 00:02:48
    people different times so sometimes
  • 00:02:50
    there'd be painters in the way there'd
  • 00:02:52
    be flooring guys
  • 00:02:53
    so different sections of this job site
  • 00:02:57
    were run at different times
  • 00:02:59
    and if you're wondering how do we get
  • 00:03:01
    this combed and looking beautiful
  • 00:03:04
    there's no trick to it there's nothing
  • 00:03:05
    glamorous everybody in every other video
  • 00:03:07
    is not showing you what I'm about to do
  • 00:03:09
    which is you go through these label by
  • 00:03:13
    label and you undo it and you put them
  • 00:03:16
    back in order and then you comb them so
  • 00:03:19
    there's nothing to it but to do it so
  • 00:03:21
    let's get started
  • 00:03:23
    in a perfect world I would have had the
  • 00:03:25
    installers run these in numerical order
  • 00:03:27
    and organize them in groups of 24 for me
  • 00:03:31
    however just wasn't possible on this job
  • 00:03:34
    that's okay A little bit of elbow grease
  • 00:03:37
    and we'll get them sorted out
  • 00:03:41
    I've located my first 24 so I'm going to
  • 00:03:43
    comb them right away
  • 00:03:45
    your cable comb as I may have stated in
  • 00:03:47
    another video is a tool that you thread
  • 00:03:50
    all your wires into and then you pull it
  • 00:03:52
    down in order to organize them in a
  • 00:03:55
    beautiful braid however you don't need
  • 00:03:57
    this tool if you don't have one just use
  • 00:04:00
    your hand and some velcro secure the
  • 00:04:03
    braid as you pull downwards and you
  • 00:04:05
    won't have any trouble making a really
  • 00:04:07
    nice bundle here
  • 00:04:10
    okay friends I've reached the end of my
  • 00:04:13
    first call
  • 00:04:15
    all of these I'm going to tape off and
  • 00:04:17
    taper so that they can get from the
  • 00:04:18
    chase pipe and then most of this like
  • 00:04:21
    here this is all going to be cut so
  • 00:04:25
    I'm gonna wrap this piece up into then
  • 00:04:28
    I'm going to start on the next 24.
  • 00:04:31
    I think I'll just transition to that one
  • 00:04:33
    I'll spare you as that okay
  • 00:04:39
    there we go all done and you didn't have
  • 00:04:41
    to watch me now I will bring them
  • 00:04:43
    through the chase pipe
  • 00:04:51
    here is the rack that our clients
  • 00:04:53
    supplied us
  • 00:04:55
    it's 12 rack units it's an open frame
  • 00:04:59
    and he's arranged it himself so that the
  • 00:05:02
    cage nuts are not used that we will
  • 00:05:05
    instead be using the tapped holes
  • 00:05:07
    these open frames present a lot of
  • 00:05:10
    difficulties
  • 00:05:12
    they don't have any features for cable
  • 00:05:14
    management and there's no side panel or
  • 00:05:16
    top panel that you can use to cover up
  • 00:05:18
    any unsightly rigging you may have had
  • 00:05:20
    to do to make this work
  • 00:05:23
    in order to mount this frame on the wall
  • 00:05:25
    the first thing I do is get my cables
  • 00:05:27
    out of the way I do this by velcroing
  • 00:05:29
    them to an overhanging pipe that's up
  • 00:05:31
    above my head temporarily so that it
  • 00:05:34
    clears the backboard in order for me to
  • 00:05:36
    apply the screws
  • 00:05:38
    in order to install the frame on the
  • 00:05:40
    backboard by myself I first drill a
  • 00:05:43
    single screw on the upper left of where
  • 00:05:45
    my frame will be I don't put it in all
  • 00:05:48
    the way just enough so that it can hold
  • 00:05:50
    some weight
  • 00:05:53
    I then carry that frame up onto the
  • 00:05:55
    ladder and put its first hole through
  • 00:05:58
    that screw in order that it will hold
  • 00:06:01
    the weight for me that gives me a chance
  • 00:06:03
    to sync a second screw and get my level
  • 00:06:05
    going
  • 00:06:08
    after I verified that my frame is on the
  • 00:06:10
    wall in a level way I'll go and get some
  • 00:06:13
    washers and then I will reapply the
  • 00:06:15
    screws one by one with the washers to
  • 00:06:18
    properly lock it onto this plywood
  • 00:06:22
    after I'm satisfied that the frame will
  • 00:06:25
    not fall off the wall and is secure I
  • 00:06:27
    will begin to attach the elements that
  • 00:06:29
    are important here I'll start with the
  • 00:06:31
    patch panels you can see here in this
  • 00:06:34
    diagram that I am following a plan so I
  • 00:06:37
    will map what is on my plan to the rack
  • 00:06:40
    units on the front of this Frame
  • 00:06:44
    during this phase of the build I will
  • 00:06:46
    only be installing the panels so that I
  • 00:06:48
    can terminate with as much freedom of
  • 00:06:50
    movement as possible
  • 00:06:53
    after I am done terminating I will begin
  • 00:06:55
    to install the cable manager and the
  • 00:06:57
    associated switches
  • 00:07:00
    the cables that I have hanging I will
  • 00:07:02
    now begin to bring into the inside of my
  • 00:07:04
    frame
  • 00:07:06
    I combed these in groups of 24 so that
  • 00:07:08
    it would be easier for me to show you
  • 00:07:10
    how I manage these cables when you
  • 00:07:12
    bundle them in groups of 48 one per
  • 00:07:15
    panel it is really difficult to manage
  • 00:07:17
    it
  • 00:07:21
    now's my favorite part this is where I
  • 00:07:23
    put in a standard rack shelf upside down
  • 00:07:26
    so that it has more stiffness and the
  • 00:07:28
    supporting lip for the equipment is
  • 00:07:30
    facing downwards and not bothering my
  • 00:07:33
    arms while I try to terminate I like to
  • 00:07:35
    do this temporarily so that I have a
  • 00:07:38
    work surface while I'm putting this
  • 00:07:40
    Frame together
  • 00:07:43
    in order to begin my terminations I'm
  • 00:07:45
    going to start with the bundle that is
  • 00:07:47
    intended to go to the lowest panel
  • 00:07:51
    in order to properly manage the length
  • 00:07:53
    of the cables as I terminate them I make
  • 00:07:55
    use of the empty sockets Within These
  • 00:07:57
    unloaded patch panels
  • 00:08:00
    once I have every Cable in this bundle
  • 00:08:02
    in position I will velcro it to keep it
  • 00:08:04
    in place I will then velcro it on the
  • 00:08:07
    rear as well so that it cannot
  • 00:08:08
    accidentally fall out of its socket
  • 00:08:10
    while I'm terminating one of the other
  • 00:08:12
    ones
  • 00:08:14
    here is an up close shot of the first
  • 00:08:16
    panel I'll be working on now that I have
  • 00:08:18
    all the wires in position and properly
  • 00:08:20
    velcroed
  • 00:08:22
    okay let's get our tools out going to be
  • 00:08:25
    using an all-in-one crib tool along with
  • 00:08:27
    these Jacks that are compatible with it
  • 00:08:29
    I really prefer this method as it's
  • 00:08:32
    great for beginners and you make a lot
  • 00:08:34
    less mistakes doing it this way
  • 00:08:37
    as you watch me terminate try and
  • 00:08:40
    imagine what this would look like if
  • 00:08:41
    this was a punch down block and you had
  • 00:08:43
    a fluke punch tool then you were trying
  • 00:08:45
    to do this by the rear it would be quite
  • 00:08:48
    a bit more difficult to manage the
  • 00:08:50
    length of the cables
  • 00:08:54
    many of my competitors and friends that
  • 00:08:56
    work in this industry have settled on a
  • 00:08:59
    particular brand of all-in-one crimp
  • 00:09:01
    tool you might look into doing something
  • 00:09:03
    similar for your projects
  • 00:09:06
    with my first panel complete I'm going
  • 00:09:08
    to start to roll my slack back up into
  • 00:09:11
    the ceiling
  • 00:09:12
    some people like to leave their service
  • 00:09:14
    loop down below the ceiling where they
  • 00:09:17
    can see it but I think that it looks
  • 00:09:19
    more aesthetically pleasing when you
  • 00:09:21
    cannot see the extra Slack
  • 00:09:26
    notice that the only visible wires are
  • 00:09:28
    what is needed to reach the panel
  • 00:09:30
    everything else I have hiding in the
  • 00:09:32
    ceiling
  • 00:09:35
    now that I've got my slack out of the
  • 00:09:36
    way I will secure my bundle with
  • 00:09:38
    additional velcro I don't want to put
  • 00:09:40
    anything that could cause strain on my
  • 00:09:42
    panel
  • 00:09:45
    with that first panel out of the way I'm
  • 00:09:46
    then going to grab the next 24 cables
  • 00:09:49
    and start on the row above that
  • 00:09:52
    you can see here that I'm repeating the
  • 00:09:55
    process of bringing my cables through
  • 00:09:57
    the unloaded patch panel ports in order
  • 00:09:59
    to manage their length once I have all
  • 00:10:02
    of them through I'm going to apply
  • 00:10:03
    velcro again so that they don't fall out
  • 00:10:05
    on accident and then I will begin
  • 00:10:07
    terminating once again
  • 00:10:10
    for this row I'm just going to
  • 00:10:12
    transition to this being magically
  • 00:10:14
    terminated here we go
  • 00:10:16
    the cables turn out pretty uniform if
  • 00:10:19
    you use the unloaded panel to guide the
  • 00:10:21
    length and if you tuck the rest up into
  • 00:10:23
    the ceiling as a service loop it tends
  • 00:10:25
    to look pretty good even if you're a
  • 00:10:27
    beginner
  • 00:10:28
    before I start my third and final panel
  • 00:10:30
    it's become apparent that my temporary
  • 00:10:33
    velcro just isn't gonna hack it anymore
  • 00:10:36
    so I'm going to switch to these saddle
  • 00:10:39
    straps in order to permanently zip tie
  • 00:10:41
    these to the backboard
  • 00:10:44
    whenever you zip tie a group of cables
  • 00:10:46
    make sure that you are doing so gently
  • 00:10:48
    Don't Force It Down as tight as you
  • 00:10:50
    possibly can because this is bad for the
  • 00:10:52
    cables just use enough to give it some
  • 00:10:54
    strain relief
  • 00:11:01
    let's finish up by doing the final set
  • 00:11:03
    of 24.
  • 00:11:04
    by now you should have a pretty good
  • 00:11:06
    idea of the pattern that I'm doing so
  • 00:11:08
    I'll just speed right through this
  • 00:11:29
    foreign
  • 00:11:36
    [Music]
  • 00:12:10
    if you've managed to get this far within
  • 00:12:12
    your own project go ahead and give
  • 00:12:13
    yourself a hand and take a much needed
  • 00:12:15
    break
  • 00:12:19
    before I wrap up for the day I need to
  • 00:12:21
    inspect this bundle and make sure that
  • 00:12:23
    nothing is drooping so I'll go through
  • 00:12:25
    and make sure that everything is as
  • 00:12:27
    horizontal as I can possibly make it
  • 00:12:29
    making sure that my zip ties are helping
  • 00:12:31
    me out and my velcro is secure
  • 00:12:36
    as you can see in this profile shot I'm
  • 00:12:38
    looking to make sure that there is room
  • 00:12:40
    for my switches and my cable managers
  • 00:12:43
    and that the cables themselves are not
  • 00:12:46
    actually drooping onto them
  • 00:12:49
    I'm going to pause here for the day but
  • 00:12:51
    before I go it's very important to clean
  • 00:12:53
    up any evidence that I was here working
  • 00:12:55
    I don't want the project manager or a
  • 00:12:58
    general contractor or any other
  • 00:12:59
    Tradesman to have to clean up my mess
  • 00:13:03
    I've been away for a few days and now
  • 00:13:05
    that I've come back to the job site I
  • 00:13:07
    barely recognize it the construction
  • 00:13:09
    team has made a lot of progress
  • 00:13:12
    to finish out this Frame I'm going to be
  • 00:13:13
    getting all of my equipment ready I've
  • 00:13:15
    got cable managers patch cords switches
  • 00:13:19
    and a router that I need to install here
  • 00:13:21
    today
  • 00:13:23
    I'm going to begin this process by
  • 00:13:25
    installing my switches first whenever
  • 00:13:27
    you're installing something heavy in the
  • 00:13:29
    rack use the bottom screw holes on the
  • 00:13:31
    rack ears to make sure that it comes out
  • 00:13:33
    level
  • 00:13:33
    also I was given a tip by one of the
  • 00:13:36
    YouTube commenters in a previous video
  • 00:13:38
    that you should install screws just
  • 00:13:40
    below where you intend to put your
  • 00:13:41
    equipment and those screws can hold the
  • 00:13:43
    weight by leaving the rack years on
  • 00:13:45
    those there we go got all the switches
  • 00:13:48
    in place
  • 00:13:49
    next I'm going to install the router
  • 00:13:51
    that the client has supplied me it's not
  • 00:13:53
    my favorite kind it's a really low end
  • 00:13:55
    sonic wall in a rack adapter this unit
  • 00:13:58
    is not normally rackable so you'll see
  • 00:14:00
    me struggle quite a bit here to get this
  • 00:14:02
    thing to line up properly once that's
  • 00:14:04
    out of the way I'll begin to install my
  • 00:14:07
    cable managers
  • 00:14:10
    the type of cable manager that I'm using
  • 00:14:12
    is called a knee patch this type has a
  • 00:14:15
    deep back that allows me to hide cable
  • 00:14:17
    slack and other loose items inside of it
  • 00:14:19
    when I'm using an open frame system it's
  • 00:14:22
    a lot easier for me to be able to hide
  • 00:14:24
    unsightly elements inside this deep
  • 00:14:27
    Channel
  • 00:14:28
    with the final cable manager in place
  • 00:14:30
    you can see that my rack is really
  • 00:14:32
    starting to look like something finely
  • 00:14:35
    now I'm going to link my switches
  • 00:14:36
    together with a fiber patch cord I was
  • 00:14:39
    initially going to use a DAC cable
  • 00:14:41
    however I discovered that because those
  • 00:14:43
    things are very finicky the one that I
  • 00:14:45
    happen to have on hand just wasn't
  • 00:14:46
    compatible with my switches no problem
  • 00:14:49
    I'll just bring the fiber patch through
  • 00:14:51
    the rear of my knee patch and then bring
  • 00:14:54
    it in through the finger duct
  • 00:14:56
    I'll show you another angle on that when
  • 00:14:58
    I get a moment but for now I'm going to
  • 00:15:00
    begin patching in the bottom panel I'm
  • 00:15:02
    starting there because there are the
  • 00:15:04
    fewest cables here it's easiest to
  • 00:15:06
    manage if I'm going to run into a
  • 00:15:08
    problem I like to know early I start
  • 00:15:10
    from Port 1 and I go in groups of two
  • 00:15:12
    rolling the slack into the neat patch
  • 00:15:14
    each time I patch something in
  • 00:15:20
    here's the cable manager from the front
  • 00:15:22
    now that I'm done I didn't run into any
  • 00:15:25
    problems with length cables reaching
  • 00:15:27
    things looking ugly Etc so I'm going to
  • 00:15:30
    start on the larger panel up top as you
  • 00:15:33
    watch me patch this one in you might be
  • 00:15:35
    wondering why didn't I use six inch
  • 00:15:36
    patch cords and eliminate the cable
  • 00:15:38
    manager altogether you could totally do
  • 00:15:40
    that if this is your rack in my case I
  • 00:15:43
    had no say over what switches the
  • 00:15:45
    customer is going to provide me and when
  • 00:15:47
    I don't know what I'm going to deal with
  • 00:15:49
    in terms of equipment I always bring a
  • 00:15:51
    cable manager with at least 2u and some
  • 00:15:54
    slack in the back where I can roll
  • 00:15:55
    things up and that that way I can handle
  • 00:15:58
    pretty much anything that the customer
  • 00:15:59
    throws at me
  • 00:16:02
    here's what the full 48 Port panel looks
  • 00:16:05
    like from the front
  • 00:16:07
    I'm almost completely done with this
  • 00:16:08
    project the last thing to do is to patch
  • 00:16:11
    in the router to the switch I'm going to
  • 00:16:15
    try to do this one-handed so that I can
  • 00:16:17
    show you how I'm routing this cable
  • 00:16:19
    through the rear of the knee patch and
  • 00:16:21
    then again in through the front of the
  • 00:16:22
    finger dunks
  • 00:16:26
    with the router patched in I'll show you
  • 00:16:28
    a profile view
  • 00:16:30
    what I'm trying to highlight here is
  • 00:16:32
    that there are no extraneous cables
  • 00:16:34
    drooping or dragging or leaning or in
  • 00:16:36
    any way being unsightly here in this
  • 00:16:38
    rack
  • 00:16:42
    there's still plenty more to do here but
  • 00:16:44
    my job is over the customer has their
  • 00:16:46
    own technology staff that is going to
  • 00:16:48
    install a UPS beneath this rack and
  • 00:16:51
    they're also going to hook up the
  • 00:16:53
    internet provider's connection I'm not
  • 00:16:55
    going to be a part of that so this is
  • 00:16:57
    where the video ends for me
  • 00:17:02
    well that's it for this pill I got
  • 00:17:04
    plenty more coming so there'll be more
  • 00:17:06
    videos thank you for hanging out with me
  • 00:17:08
    appreciate it I'll see you in the next
  • 00:17:10
    one
  • 00:17:14
    foreign
  • 00:17:20
    [Music]
Tag
  • network cable management
  • Cat6 cables
  • office setup
  • cable organization
  • rack installation
  • chase pipe
  • cable labeling