Install ArcSWAT Add-in for ArcGIS Pro - Beta Version

00:09:42
https://www.youtube.com/watch?v=mGfh6NzhSm4

Resumen

TLDRThe video provides a step-by-step guide for installing the SWAT 2012 version add-in for ArcGIS Pro. It begins by directing viewers to the SWAT website to download the necessary ARX plugin and the SWAT editor. The narration emphasizes ensuring that the ArcSWAT database file is located in the SWAT editor's databases folder before proceeding with the add-in installation. After running the setup for both the SWAT editor and the ARX plugin, the video stresses the importance of refreshing ArcGIS Pro to make the new plugin accessible. It concludes by confirming the successful installation of the ARX plugin and suggests that users can explore further tutorials on using the interface effectively for SWAT modeling.

Para llevar

  • 🖥️ Visit the SWAT website to download necessary files.
  • 📂 Ensure the ARX database file is in the correct folder.
  • ⚙️ Follow the installation wizard for SWAT Editor.
  • 🔄 Restart ArcGIS Pro to see the new plugin tab.
  • ✅ Confirm installation success by locating the ARX tab.

Cronología

  • 00:00:00 - 00:09:42

    The video details the installation process for the SWAT 2012 version add-in on ArcGIS Pro. The first step involves visiting the SWAT website to download both the ARX plug-in and the SWAT editor. If the SWAT editor is not installed, users must do so, ensuring the ARX SWAT database file is present in the databases folder. Following the download of the necessary files, the SWAT editor is installed by running the setup, where users follow the installation wizard steps. Post-installation, it is crucial to verify the presence of the ‘arvat pros 2012.MDB’ file in the databases folder, signifying readiness to proceed with the ARX plug-in installation. As part of the preparation, users check their ArcGIS Pro version to ensure compatibility. After downloading and attempting to install the ARX plug-in, a message confirms successful installation. However, if the ARX tab does not appear initially, users must restart ArcGIS Pro for changes to take effect. Successful installation is confirmed when the ARX tab appears between the Share and Help tabs, allowing users to start using the plug-in effectively for SWAT modeling.

Mapa mental

Vídeo de preguntas y respuestas

  • What is the first step in installing the SWAT add-in?

    Visit the SWAT website and download the ARX plugin and SWAT editor.

  • Is it necessary to install the SWAT editor if I already have it?

    No, if you already have the SWAT editor installed, you can skip its installation.

  • How can I confirm if the ARX plugin is installed successfully?

    After installation, check for the ARX tab in ArcGIS Pro; if it appears, the installation was successful.

  • What should I do if the ARX tab does not appear in ArcGIS Pro?

    Close and reopen ArcGIS Pro to refresh it, as the program needs to be restarted for the plugin to appear.

  • What versions of ArcGIS Pro does the ARX plugin support?

    Currently, the plugin is available for ArcGIS Pro version 3.2.

Ver más resúmenes de vídeos

Obtén acceso instantáneo a resúmenes gratuitos de vídeos de YouTube gracias a la IA.
Subtítulos
en
Desplazamiento automático:
  • 00:00:03
    hello this video is uh on installing
  • 00:00:06
    SWAT 2012 version addin on args Pro the
  • 00:00:12
    installation of AR arvat addin or
  • 00:00:15
    plug-in it's uh simple but need to take
  • 00:00:20
    care of a few steps to have this plug-in
  • 00:00:23
    working effectively so here are the four
  • 00:00:25
    steps which we are going to cover in
  • 00:00:28
    this video first of of all we will visit
  • 00:00:31
    SWAT website which is swat. tamu.edu
  • 00:00:36
    demu stand for Texas ANM University so
  • 00:00:40
    on this SWAT website we will first
  • 00:00:42
    download ARX plugin along with that we
  • 00:00:46
    will also download sweat editor and
  • 00:00:50
    install it if you have already have a
  • 00:00:53
    SWAT editor installed on your
  • 00:00:56
    computer you can ignore this step but
  • 00:00:59
    make sure you have have this AR SWAT uh
  • 00:01:03
    database file. MDB file under the SWAT
  • 00:01:06
    editor databases folder if not install
  • 00:01:10
    the sweat editor or uh copy this file
  • 00:01:14
    simply to your database folder so let's
  • 00:01:17
    first go to the SWAT
  • 00:01:19
    website I have the SWAT website open
  • 00:01:22
    here so here is s website homepage on
  • 00:01:26
    the top right corner you can see we have
  • 00:01:30
    the software tab we will click on this
  • 00:01:33
    one and you will see here both of our
  • 00:01:36
    model SWAT model versions are
  • 00:01:39
    available uh since this video is about
  • 00:01:42
    SWAT 2012 plug-in for args pro we will
  • 00:01:46
    go to the swag 2012 web
  • 00:01:48
    page and on this web page here you have
  • 00:01:53
    we have this arwat tab simply by
  • 00:01:56
    clicking on it you can download the arat
  • 00:01:59
    plug
  • 00:02:00
    in uh you can see on the same web page
  • 00:02:04
    we have the SWAT editor also you can
  • 00:02:07
    download Swat editor also from
  • 00:02:11
    here I have both of these file installed
  • 00:02:14
    under my download
  • 00:02:19
    folder so the plug-in the addin would be
  • 00:02:23
    installed with DOT history adding X
  • 00:02:27
    extension whereas a sweat editor will be
  • 00:02:30
    installed in a Gip folder you can unzip
  • 00:02:33
    it let's first install the sweat editor
  • 00:02:37
    under the sweat installed SWAT
  • 00:02:40
    downloaded sweat editor folder look for
  • 00:02:44
    setup.exe
  • 00:02:46
    simply double click on this one and a
  • 00:02:51
    sweat editor setup visard would appear
  • 00:02:55
    make your selections by clicking on next
  • 00:02:58
    and accepting the agreement
  • 00:03:00
    and uh uh defining the location usually
  • 00:03:05
    keep it the same under the C drive
  • 00:03:07
    because ARX plug-in would be looking for
  • 00:03:10
    some database files under the same
  • 00:03:13
    folder make your selection for everyone
  • 00:03:17
    or just me click on the next and uh with
  • 00:03:22
    that one you will be able to install the
  • 00:03:25
    sweat editor on your computer so I'm not
  • 00:03:29
    clicking the next here to start the
  • 00:03:31
    installation because I have already
  • 00:03:32
    installed it it will take couple of
  • 00:03:35
    minutes to install it's not uh uh there
  • 00:03:40
    is no further steps to install that this
  • 00:03:43
    one and as we have installed the SWAT
  • 00:03:46
    editor it is time to make sure that we
  • 00:03:50
    have Arc SWAT database file under the
  • 00:03:54
    databases folder so for that one we will
  • 00:03:57
    go to the C drive
  • 00:04:00
    C drive under the SWAT folder under the
  • 00:04:04
    SWAT editor
  • 00:04:06
    folder under databases folder and we
  • 00:04:10
    will look for arvat pros 2012. MDB
  • 00:04:16
    file as we uh have this file this means
  • 00:04:20
    we are ready to install and use arat
  • 00:04:25
    plugin going back to my download folder
  • 00:04:32
    and I have the arwat plug-in downloaded
  • 00:04:38
    but before installing it let me go to
  • 00:04:41
    the args pro on the top right corner
  • 00:04:46
    under the project tab you first let's
  • 00:04:50
    see what version of RGS Pro I have I
  • 00:04:55
    have clicked on this about
  • 00:04:57
    tab here is AR GS pro
  • 00:05:01
    3.2.1 version I have uh currently we
  • 00:05:05
    have a AR SW Pro plugin default for RGS
  • 00:05:10
    Pro 3.2 version but in future we will
  • 00:05:14
    have multiple
  • 00:05:17
    plugins depending on the uh different
  • 00:05:20
    RGS pro
  • 00:05:23
    versions um then uh here is addin
  • 00:05:27
    manager of args pro
  • 00:05:31
    here you can see we don't have any
  • 00:05:33
    adding so this uh so this is where when
  • 00:05:37
    we will install our ARX plugin that
  • 00:05:40
    would appear here also uh here on the
  • 00:05:45
    top tab where we have Pros project map
  • 00:05:49
    and insert tabs here after installing
  • 00:05:53
    the AR sweat Pro plug-in one tab would
  • 00:05:57
    appear here in between shape sh and help
  • 00:06:01
    uh with name of arfat since we don't
  • 00:06:04
    have any tab here that means we have we
  • 00:06:07
    have not installed arat Pro yet so let's
  • 00:06:12
    uh install it um just simple double
  • 00:06:16
    click on this
  • 00:06:17
    installed and on this downloaded file
  • 00:06:21
    click on the install heading and this
  • 00:06:25
    after the installation completion this
  • 00:06:28
    message would
  • 00:06:30
    appear um click okay and now it's it is
  • 00:06:36
    time to check whether the arwat prop
  • 00:06:39
    luging is installed or not so for that
  • 00:06:43
    one here we can see in between share and
  • 00:06:47
    help there H has not any arwat tab
  • 00:06:52
    appeared so this mean there is a is
  • 00:06:55
    there a problem to in the installation
  • 00:06:58
    or what happened
  • 00:07:00
    and under the addin manager here again
  • 00:07:02
    we can see dark sweat Pro plugin has not
  • 00:07:05
    been
  • 00:07:07
    installed this happened because when we
  • 00:07:09
    were in when we have installed dark GS
  • 00:07:12
    Pro was already open even though the pl
  • 00:07:16
    uh Plugin or the addin has been
  • 00:07:19
    installed but since it was open it has
  • 00:07:23
    not appeared yet so we have to refresh
  • 00:07:26
    it refresh the RGS Pro and I'm simply
  • 00:07:31
    closing it and reopening RGS
  • 00:07:36
    Pro to refresh RGS Pro and see if my
  • 00:07:41
    plug-in is installed successfully or
  • 00:07:44
    not opening RGS Pro will take a few
  • 00:07:55
    seconds okay I will start without a
  • 00:07:58
    template
  • 00:08:00
    and here you can see on the top along
  • 00:08:03
    with share and help ARX tab has appeared
  • 00:08:07
    that means our installation has been
  • 00:08:10
    successful and under the project file go
  • 00:08:13
    to the addin manager and you can see one
  • 00:08:17
    addin has appeared which is ARX 3 and
  • 00:08:19
    here is some information of the version
  • 00:08:23
    and uh Creator and location of that
  • 00:08:27
    plug-in on your computer and you can
  • 00:08:30
    manage the plugin from here in future if
  • 00:08:32
    you need to delete this PL plugin and
  • 00:08:36
    need to install a new
  • 00:08:39
    one let's go back to the arat Pro Tab
  • 00:08:44
    here uh just simp by simple clicking on
  • 00:08:48
    start ARX the plug-in would be ready to
  • 00:08:53
    use so we have kept the uh interface
  • 00:08:56
    similar to The Q so there are multiple
  • 00:09:00
    videos available on YouTube how to use
  • 00:09:04
    qat interface effectively to develop to
  • 00:09:09
    uh generate a SWAT project so we are not
  • 00:09:12
    covering that one in this
  • 00:09:13
    video um you can refer to those videos
  • 00:09:17
    since the entire interface is
  • 00:09:19
    same well with that we have installed
  • 00:09:23
    our plugin successfully and it is ready
  • 00:09:28
    to use
  • 00:09:29
    and do some Innovative sweat modeling
  • 00:09:32
    research good luck and thank you
Etiquetas
  • SWAT 2012
  • ArcGIS Pro
  • ARX Plugin
  • Installation Guide
  • SWAT Editor
  • Database Configuration
  • Modeling
  • Research
  • Setup Instructions
  • GIS Software