DIY Rick And Morty Portal Gun (Homemade, How To, Cardboard)

00:06:59
https://www.youtube.com/watch?v=OAjTAgLBYO0

摘要

TLDRThis video tutorial shows how to create Rick's portal gun from 'Rick and Morty' using simple materials like cardboard and hot glue. The creator starts by measuring and cutting the main body and side pieces, then constructs the handle from a cardboard tube. The video details the process of making the portal effect with hot glue and assembling the parts, culminating in painting the finished product. Viewers are encouraged to share their own versions and subscribe for more crafting content.

心得

  • ✂️ Measure and cut a 5x3 inch piece of cardboard for the main body.
  • 🛠️ Use scrap cardboard for side pieces and round the edges.
  • 🔄 Create a handle from a cardboard tube at a slight angle.
  • 🔴 Make a circular button from corrugated cardboard.
  • 💡 Use hot glue to create portal-like patterns.
  • 🔍 Find a clear plastic bottle for the dome.
  • 🎨 Paint the assembled portal gun for a finished look.
  • 💬 Share your creations in the comments!
  • 👍 Like and subscribe for more crafting videos.
  • 📅 Check out the models and props playlist for more projects.

时间轴

  • 00:00:00 - 00:06:59

    In this video, the creator demonstrates how to make Rick's portal gun from 'Rick and Morty'. The process begins with measuring and cutting a piece of cardboard for the main body, followed by creating side pieces and rounding the ends of the longest pieces. The handle is crafted from a cardboard tube, shaped to fit at a slight angle. A circular button is added on top of the handle, and the creator shares a mistake made with the number of lights, emphasizing the importance of accuracy. The small portal is made using hot glue to create swirling patterns, and a clear plastic bottle is repurposed for the dome. Finally, the video concludes with a call to action for viewers to engage with the content and explore more projects.

思维导图

视频问答

  • What materials do I need to make the portal gun?

    You will need cardboard, a cardboard tube, hot glue, and a clear plastic bottle.

  • How do I create the portal effect?

    Use hot glue to make swirling patterns and attach them to a clear plastic base.

  • Can I add lights to the portal gun?

    Yes, you can add lights for extra effect, though it's optional.

  • What should I do if I make a mistake?

    Don't worry! You can adjust or fix mistakes as you go.

  • Where can I find more projects like this?

    Check out the models and props playlist on the channel.

查看更多视频摘要

即时访问由人工智能支持的免费 YouTube 视频摘要！
字幕
en
自动滚动:
  • 00:00:01
    in today's video i'm going to show you
  • 00:00:02
    how i made rick's trusty portal gun from
  • 00:00:04
    rick and morty
  • 00:00:07
    [Music]
  • 00:00:11
    the first thing i did was measure out a
  • 00:00:13
    five inch by three inch piece of card
  • 00:00:14
    that will be the main body of the portal
  • 00:00:16
    gun
  • 00:00:16
    [Music]
  • 00:00:18
    i cut it out and then drew around it to
  • 00:00:22
    make another
  • 00:00:27
    the next thing i needed were the side
  • 00:00:28
    pieces
  • 00:00:30
    i took some scrap pieces of card cut
  • 00:00:33
    them down to one inch tall
  • 00:00:36
    and then placed them up against the
  • 00:00:38
    pieces i'd already made to get the
  • 00:00:39
    correct length
  • 00:00:46
    now the ends on the two longest pieces
  • 00:00:48
    need to be rounded off on one side
  • 00:00:50
    before all the pieces can be glued
  • 00:00:52
    together
  • 00:00:53
    [Music]
  • 00:00:57
    making sure that the front piece is
  • 00:00:58
    slightly inset
  • 00:01:15
    to create the curve around the back i
  • 00:01:17
    used a sheet of card which i cut to size
  • 00:01:21
    and then glued in place
  • 00:01:29
    before using more card to neaten
  • 00:01:31
    everything up
  • 00:01:32
    drawing around each side cutting it out
  • 00:01:36
    and gluing them in place
  • 00:01:46
    [Music]
  • 00:01:52
    then the main body of the portal gun is
  • 00:01:53
    done
  • 00:01:56
    to make the handle i just used a regular
  • 00:01:58
    cardboard tube
  • 00:01:59
    i cut it up the middle and rolled it up
  • 00:02:01
    tightly until it was the right size
  • 00:02:03
    roughly one inch wide and four inches
  • 00:02:05
    tall
  • 00:02:07
    to make sure it attaches correctly place
  • 00:02:09
    it against the main body
  • 00:02:10
    draw around the curved edge to get the
  • 00:02:12
    right angle do the same on the other
  • 00:02:14
    side
  • 00:02:14
    and then cut them out test it and adjust
  • 00:02:16
    the fit if you need to
  • 00:02:18
    it's also worth noting that the handle
  • 00:02:19
    doesn't sit straight in line with the
  • 00:02:20
    body
  • 00:02:21
    it's at a slight 170 degree angle but go
  • 00:02:24
    with whatever looks and feels right
  • 00:02:25
    before gluing it in place for the large
  • 00:02:28
    circular button that sits on the top of
  • 00:02:30
    the handle it's nice and simple
  • 00:02:31
    i drew a circle onto some corrugated
  • 00:02:33
    cardboard cut it out
  • 00:02:35
    and attached but making the front lights
  • 00:02:38
    is where i actually made a mistake
  • 00:02:39
    i used a hot glue gun to carefully make
  • 00:02:41
    the bulbs and i'm pretty happy with how
  • 00:02:42
    they turned out
  • 00:02:43
    but there are only supposed to be three
  • 00:02:44
    of them and i made four by accident
  • 00:02:47
    i'm not too worried about it and it's
  • 00:02:48
    something i might fix later but when you
  • 00:02:50
    make yours you can make sure you don't
  • 00:02:51
    make my mistake
  • 00:02:53
    to recreate the small portal that's
  • 00:02:54
    contained within the dome on top of the
  • 00:02:56
    gun i squeezed out ribbons of hot glue
  • 00:02:58
    onto a non-stick surface
  • 00:02:59
    creating random swirling portal-like
  • 00:03:01
    patterns that could be glued together
  • 00:03:04
    i waited for them to cool peeled them
  • 00:03:07
    off
  • 00:03:09
    and attached them together
  • 00:03:15
    then i glued and rolled up a sheet of
  • 00:03:16
    clear plastic around 1 inch tall for it
  • 00:03:18
    to stand on
  • 00:03:21
    and because it's clear hopefully it
  • 00:03:22
    should give the impression that it's
  • 00:03:23
    floating as it does in the show
  • 00:03:29
    for the glass dome that the mini portal
  • 00:03:31
    sits in i found an old clear plastic
  • 00:03:32
    bottle that was the perfect size
  • 00:03:35
    i cut off the end and sanded it smooth
  • 00:03:48
    now all that's left to do is bring
  • 00:03:49
    everything together if you wanted to at
  • 00:03:51
    this point you could add some lights
  • 00:03:53
    but for now at long last we can finally
  • 00:03:55
    start painting
  • 00:04:37
    [Music]
  • 00:04:42
    [Music]
  • 00:04:55
    [Music]
  • 00:05:10
    [Music]
  • 00:05:59
    [Music]
  • 00:06:10
    i really hope you enjoyed today's video
  • 00:06:12
    let me know what you think or if you end
  • 00:06:13
    up making this for yourself down in the
  • 00:06:14
    comments
  • 00:06:15
    thank you for watching if you did enjoy
  • 00:06:17
    today's video check out my models and
  • 00:06:18
    props playlist for more projects and
  • 00:06:20
    crafts just like this
  • 00:06:21
    please like and subscribe to support the
  • 00:06:23
    channel it really would be greatly
  • 00:06:24
    appreciated
  • 00:06:25
    leave any suggestions for future model
  • 00:06:27
    or prop videos you might have down in
  • 00:06:28
    the comments
  • 00:06:29
    thank you and i'll see you in the next
  • 00:06:31
    video bye-bye
  • 00:06:36
    [Music]
  • 00:06:42
    [Music]
  • 00:06:58
    you
标签
  • Rick and Morty
  • portal gun
  • DIY
  • crafting
  • hot glue
  • cardboard
  • tutorial
  • models
  • props
  • video