Simulasi OSI LAYER Menggunakan Cisco Packet Tracer

00:07:26
https://www.youtube.com/watch?v=4LYXCxSMgUY

الملخص

TLDRThe video tutorial explains how to create a simulation involving a PC and a server. It details the necessary equipment, including a PC with the IP address 192.168.1.2 and a server with a different IP. The tutorial walks through connecting the devices with a crossover cable, configuring their IP addresses, and enabling HTTP services. Viewers learn how to access the server from the PC and monitor the communication process using simulation tools, focusing on ARP, ICMP, and HTTP protocols. The video emphasizes documenting the processes in a table for clarity.

الوجبات الجاهزة

  • 💻 Set up a PC and server for simulation
  • 🔌 Connect devices using a crossover cable
  • 🌐 Configure IP addresses for communication
  • 🖥️ Enable HTTP service on the server
  • 📡 Access the server from the PC
  • 📊 Monitor ARP, ICMP, and HTTP protocols
  • 📝 Document processes in a table
  • 🔍 Analyze communication between devices
  • ⚙️ Use simulation tools for monitoring
  • 📈 Understand networking layers involved

الجدول الزمني

  • 00:00:00 - 00:07:26

    In this video, we will simulate a network setup involving a PC and a server. The PC is assigned an IP address of 192.168.1.2, while the server has an IP of 192.168.1.28. We connect them using a crossover cable and configure their IP addresses. After successful connectivity tests, we enable the HTTP service on the server and customize a webpage with a name and attendance number. We then access this page from the PC, confirming the setup works as intended. Next, we clear the event filter in our simulation tool and set it to record ARP, ICMP, and HTTP traffic. We observe the communication between the PC and server, noting the processes at different layers of the network model. We analyze the frames being sent and received, confirming that the PC sends requests and the server responds appropriately. Finally, we encourage viewers to document the processes in a provided table and translate the content into Indonesian.

الخريطة الذهنية

فيديو أسئلة وأجوبة

  • What devices are needed for the simulation?

    You need a PC and a server.

  • What is the IP address of the PC in the simulation?

    The IP address of the PC is 192.168.1.2.

  • How do you connect the PC and server?

    You connect them using a crossover cable.

  • What service is enabled on the server?

    The HTTP service is enabled.

  • How can you access the server from the PC?

    You can access the server by entering its IP address in a web browser.

  • What protocols are monitored during the simulation?

    The simulation monitors ARP, ICMP, and HTTP protocols.

  • What should you do after completing the simulation?

    Document the processes in the provided table.

عرض المزيد من ملخصات الفيديو

احصل على وصول فوري إلى ملخصات فيديو YouTube المجانية المدعومة بالذكاء الاصطناعي!
الترجمات
id
التمرير التلقائي:
  • 00:00:00
    asalamualaikum warahmatullahi
  • 00:00:01
    wabarakatuh pada video kali ini kita
  • 00:00:03
    akan mencoba untuk membuat simulasi
  • 00:00:06
    terkait dengan osiler Nah kita merlukan
  • 00:00:09
    beberapa perangkat yang pertama itu
  • 00:00:11
    adalah
  • 00:00:11
    PC yang kedua adalah
  • 00:00:15
    servernya kita bisa ganti untuk namanya
  • 00:00:18
    ini
  • 00:00:20
    PC dengan IP
  • 00:00:23
    19216812
  • 00:00:24
    misalkan dan Berikutnya ini adalah
  • 00:00:27
    server dengan
  • 00:00:28
    ip28 s s nah nantinya akan seperti itu
  • 00:00:33
    Nah sebelumnya kita coba
  • 00:00:36
    hubungkangunakan kabel tipe Cross
  • 00:00:42
    Oke Setelah itu kita berikan IP kita
  • 00:00:46
    config terlebih
  • 00:00:47
    dahulu 192
  • 00:00:51
    1681
  • 00:00:53
    1 sor 1 du ya UN
  • 00:00:58
    pc-nya Setelah itu kita kita coba untuk
  • 00:01:02
    isi yang berikutnya 192
  • 00:01:06
    1681 1
  • 00:01:10
    oke kita tes bisa
  • 00:01:13
    ya dari
  • 00:01:16
    server suces dan sebaliknya kita
  • 00:01:21
    coba Sukses juga oke ter selanjutnya
  • 00:01:24
    kita akan coba kelola terkait servisnya
  • 00:01:27
    servis yang ada di sini
  • 00:01:30
    kita onkan http-nya saja Lalu kita ganti
  • 00:01:33
    ini tulisannya mapel
  • 00:01:38
    pilihan cna oke itu aja lalu kita
  • 00:01:42
    tambahkan di
  • 00:01:43
    sini tulisan nama dan absen
  • 00:01:47
    kalian ya kita capock aja Misalkan
  • 00:01:54
    adityya ya abset 01
  • 00:02:02
    Oke Setelah itu kita save kita override
  • 00:02:06
    kita close dan kita coba akses melalui
  • 00:02:09
    pc-nya
  • 00:02:14
    Oke kita Tuliskan attp tadi ya
  • 00:02:22
    192181.1 kita go
  • 00:02:25
    Oke sudah tampil ya Aditya dan m pilihan
  • 00:02:28
    channel Nah dari sini kita bisa melihat
  • 00:02:32
    prosesnya nanti ya satu persatu terkait
  • 00:02:35
    dengan
  • 00:02:37
    I kita coba masuk ke
  • 00:02:41
    simulasi Setelah
  • 00:02:43
    itu kita clear saja dulu ini ya event
  • 00:02:47
    filter visible eventnya banyak sekali
  • 00:02:50
    kita coba untuk e mengclear terlebih
  • 00:02:54
    dahulu setelah
  • 00:02:56
    itu ini hanya play control aja untuk
  • 00:02:58
    kecepatan
  • 00:03:00
    kita edit saja apa yang akan kita rekam
  • 00:03:03
    misalkan ARP dan icmp lalu kita pakai
  • 00:03:07
    http ya
  • 00:03:09
    oke centang saja seperti itu lalu kita
  • 00:03:12
    coba buka browser yang
  • 00:03:17
    tadi kita go
  • 00:03:20
    gitu
  • 00:03:22
    kita coba Play
  • 00:03:30
    ya jadi di sini ada server ini sama PC
  • 00:03:32
    ini ya yang berkomunikasi kita coba lagi
  • 00:03:37
    bisa kita go
  • 00:03:39
    lagi kita Coba lakukan
  • 00:03:46
    oke
  • 00:04:00
    ya Tunggu dia sampai berhenti ya sang
  • 00:04:08
    proses
  • 00:04:09
    nah sampai seperti ini jadi boleh kalian
  • 00:04:13
    tombol play-nya boleh atau tombol yang
  • 00:04:17
    eh fored Ya silakan Setelah itu kita
  • 00:04:21
    bisa cek ya dari di sini ada http ini
  • 00:04:25
    yang terakhir ya kita bisa cek di antara
  • 00:04:27
    ini dulu Nah di sini ada
  • 00:04:30
    proses ya proses yang terjadi Kita juga
  • 00:04:34
    bisa cek
  • 00:04:35
    e yang komplit aja ya Jadi kalau
  • 00:04:38
    misalkan yang berarti sudah
  • 00:04:42
    dua-duanya terproses dengan baik kita
  • 00:04:45
    stop
  • 00:04:48
    aja nah kalian bisa pilih ini ya Dari
  • 00:04:53
    sini adalah proses-proses yang terjadi
  • 00:04:58
    pada layer
  • 00:05:00
    ya di sini yang tidak ada adalah Layer 6
  • 00:05:02
    layer 7 kemungkinan ini adalah Layer
  • 00:05:06
    yang digunakan pada TCP ya yaitu 567
  • 00:05:10
    menjadi S layer Nah
  • 00:05:13
    kita cek saja mulai dari layar ini F
  • 00:05:17
    ethernet0 ya sini F enet0 juga
  • 00:05:21
    terjadi
  • 00:05:23
    komunikasi yaive the frame kalau dari
  • 00:05:27
    sini
  • 00:05:30
    out the frame Berarti yangsend siapa
  • 00:05:32
    tadi ya kalau misalkan kita dari sini
  • 00:05:34
    yang aksesnya dari PC berarti yang
  • 00:05:35
    ngirim adalah PC nah sedangkan di sini
  • 00:05:39
    servernya
  • 00:05:40
    menerima seperti
  • 00:05:42
    itu dan seterusnya terjadi komunikasi di
  • 00:05:46
    antara kedua perang
  • 00:05:50
    tersebut the subn dan seterusnya bahasa
  • 00:05:54
    Inggris bisa kalian terjemahkan dalam
  • 00:05:57
    bahasa Indonesia
  • 00:06:03
    seperti itu teman-teman mungkin
  • 00:06:07
    bisa
  • 00:06:12
    dicoba
  • 00:06:13
    serverceive request ini dibalikkan lagi
  • 00:06:17
    the server send back http rep to the
  • 00:06:21
    CLI J di sini meminta sini merespon gitu
  • 00:06:25
    kan siniemta sini merespon
  • 00:06:29
    nah seperti itu set set set set set gitu
  • 00:06:33
    berarti out di sini ini
  • 00:06:36
    adalah
  • 00:06:38
    isinya rep The
  • 00:06:44
    C gitu ya ini server ini
  • 00:06:48
    isinya gu bisa kalian masukkan
  • 00:06:51
    tulisan-tulisan ini atau proses ini ke
  • 00:06:53
    dalam tabel yang sudah disediakan Inah
  • 00:06:57
    tabelnya ya proses ee PC proses di
  • 00:07:01
    server silakan dimasukkan ke sini saja
  • 00:07:03
    untuk proses-proses
  • 00:07:06
    tadi oke seperti itu saja penjelasannya
  • 00:07:09
    bisa dicoba terlebih dahulu bisa
  • 00:07:11
    diterjemahkan ya untuk yang bahasa
  • 00:07:13
    Inggris tadi ke dalam bahasa
  • 00:07:16
    Indonesia terima kasih dan selamat
  • 00:07:20
    mencoba
الوسوم
  • simulation
  • PC
  • server
  • IP address
  • HTTP
  • ARP
  • ICMP
  • networking
  • communication
  • tutorial