digital teeth set up

00:09:55
https://www.youtube.com/watch?v=MB73YU9egJI

Resumen

TLDRAquest vídeo proporciona una guia pas a pas per a la configuració digital de les dents mitjançant el programari Academy de Denka. Centrant-se principalment en la configuració de les dents centrals, laterals i canines, es discuteixen les inclinacions necessàries segons les classes dentals i com ajustar aquestes inclinacions respecte als eixos XYZ. S'expliquen dos enfocaments per configurar dents centrals: el centre suau i el bol central. La configuració del caní s'explica amb regles específiques de visibilitat facial i inclinació. També es descriuen paràmetres clau per a les dents mandibulars anteriors i posteriors, incloent-hi el solapament vertical i horitzontal. Finalment, el vídeo subratlla la importància de verificar i ajustar la simetria i l'alineació dental per aconseguir un puntatge òptim d'alineació.

Para llevar

  • 🦷 Ús del programari web-based Academy de Denka per a la configuració dental.
  • 📏 Ajust de les inclinacions dentals segons les classes.
  • 🔄 Dos mètodes per configurar dents centrals: centre suau i bol central.
  • 🐶 Regles específiques per a la configuració del caní.
  • 📐 Paràmetres clau per a dents mandibulars anteriors i posteriors.
  • ✅ Importància de la simetria dental en la configuració.
  • 👥 Solapament vertical i horitzontal com a factors crucials.
  • 🔧 Verificació i ajust dels punts per millorar l'alineació dental.
  • ⚙️ Configuració d'escalonat lateral segons necessitats personals.
  • 🔍 Importància d'una configuració exacta per a un escorçament òptim.

Cronología

  • 00:00:00 - 00:09:55

    En aquest vídeo es discuteix com configurar digitalment dents de forma utilitzant el programari web academy.denka.com. Es destaca la importància de la inclinació específica dels dents centrals i laterals en relació amb la classe de relació maxil·lar. S'explica que els dents centrals no haurien de tenir una inclinació digital significativa i s'haurien de configurar perpendiculars a les crestes. Hi ha dues configuracions de rotació, suau i bold, per a les dents centrals, i s'explica com ajustar la posició XYZ detalladament utilitzant el cursor en el programari.

Mapa mental

Mind Map

Preguntas frecuentes

  • Quin programari s'utilitza per fer la configuració digital de les dents?

    S'utilitza el programari web-based Academy de Denka.

  • Quina és la inclinació d'inserció de les dents centrals per classe?

    La classe 1 és perpendicular, la classe 2 inclina palatalment i la classe 3 inclina labialment.

  • Quines són les regles per a la configuració del caní?

    La vista frontal ha de mostrar només la meitat de la superfície facial i l'eix vertical ha de ser perpendicular al pla oclusal.

  • Quines són les especificacions per a les dents anteriors mandíbulars?

    Hi ha quatre especificacions: solapament vertical, solapament horitzontal, inclinació anterior-posterior, i inclinació de l'eix llarg.

  • Hi ha diferències en la configuració de les escales de l'escalonat lateral?

    Sí, es poden configurar com a escalonat lateral suau o eminent segons el cas.

  • Com s'ha de configurar la longitud de les dents en el pla oclusal?

    La longitud serà la mateixa que la del pla oclusal o de l'anell de cera, amb algunes variacions segons el cas.

  • Quines consideracions s'han de tenir en compte per a la simetria dental?

    S'ha d'aconseguir simetria entre les dents anteriors abans de continuar amb altres passos.

  • Com es verifica l'alineació ideal de les dents?

    Mitjançant la verificació del punt de color que indica si està lluny de la posició ideal, i ajustaments menors per obtenir un millor puntatge.

Ver más resúmenes de vídeos

Obtén acceso instantáneo a resúmenes gratuitos de vídeos de YouTube gracias a la IA.
Subtítulos
en
Desplazamiento automático:
  • 00:00:01
    digitality setup
  • 00:00:03
    i'm going to discuss how to set these
  • 00:00:06
    digitally
  • 00:00:08
    we're going to use academy.denka.com
  • 00:00:12
    web-based software you could make a
  • 00:00:16
    login
  • 00:00:17
    your own information starting from
  • 00:00:20
    centralities does require specific
  • 00:00:23
    inclination
  • 00:00:25
    in xyz location
  • 00:00:28
    class one two three jaw relationship
  • 00:00:31
    makes the labia palatal inclination
  • 00:00:33
    differently
  • 00:00:35
    class one will be perpendicular set up
  • 00:00:37
    to the rich
  • 00:00:38
    class two palatal incline class three
  • 00:00:42
    labial incline in central
  • 00:00:45
    teeth major digital inclination should
  • 00:00:48
    be none
  • 00:00:49
    meaning you gotta make perpendicular to
  • 00:00:52
    the ridges
  • 00:00:54
    and there's a two rotation you could set
  • 00:00:56
    it up soft
  • 00:00:58
    center you will basically making
  • 00:01:00
    centuries following the arch
  • 00:01:02
    but the bold central setup you making
  • 00:01:05
    disturbed portion of the centroid is
  • 00:01:07
    flaring
  • 00:01:08
    out note that you do not make any major
  • 00:01:12
    flaring on the central teeth and the
  • 00:01:15
    length
  • 00:01:16
    will be the same as the occlusal limb or
  • 00:01:19
    wax ring
  • 00:01:23
    so based on what we just learned
  • 00:01:27
    we position the center teeth accordingly
  • 00:01:31
    and be careful you need to watch xyz
  • 00:01:34
    location
  • 00:01:35
    on the left hand side of the screen will
  • 00:01:37
    show you
  • 00:01:38
    xyz location and you could use the
  • 00:01:41
    cursor in any position
  • 00:01:44
    and allow you to move very detailed
  • 00:01:48
    movement on this particular position
  • 00:01:56
    for ladder also there's a two different
  • 00:02:00
    setup
  • 00:02:01
    soft ladder or bold ladder setup
  • 00:02:05
    depends on what you're looking for you
  • 00:02:08
    could soft ladder
  • 00:02:09
    have a ladder neck in long axis
  • 00:02:13
    inclined distally and rotation will be
  • 00:02:16
    immediately flared out
  • 00:02:18
    and the length of the ladder in size
  • 00:02:21
    would be one millimeter less than
  • 00:02:23
    or cruiser plane
  • 00:02:26
    on the other hand the bold ladder setup
  • 00:02:28
    will be perpendicular
  • 00:02:30
    and no media distance inclination and
  • 00:02:33
    making distal flare
  • 00:02:36
    and also the length of the incisor will
  • 00:02:39
    be
  • 00:02:40
    as the same as occlusal plane
  • 00:02:43
    or wax ring position
  • 00:02:46
    so you could make a letter t set up
  • 00:02:49
    differently depends
  • 00:02:50
    on what the patient's looking for
  • 00:02:53
    when you look at a little bit detail
  • 00:02:55
    about the rotation
  • 00:02:57
    this is the mesial rotation for the
  • 00:03:00
    ladder
  • 00:03:00
    so bring the media a little bit more
  • 00:03:02
    facially
  • 00:03:04
    or for bold setup moving
  • 00:03:08
    rotation from the distal so this is
  • 00:03:12
    for the bold setup
  • 00:03:16
    depending on the patient age group
  • 00:03:20
    you could set the lateral piece
  • 00:03:24
    flat which means the same as inside
  • 00:03:26
    center
  • 00:03:28
    or half a millimeter up or
  • 00:03:31
    younger patient you could make ladder
  • 00:03:34
    incisor level
  • 00:03:35
    as one millimeter shorter than the
  • 00:03:37
    central incisor as you see in this
  • 00:03:39
    picture
  • 00:03:42
    so ladder setting up
  • 00:03:47
    again you try to set it up according to
  • 00:03:50
    what we learned
  • 00:03:52
    and soft you could set it up as a soft
  • 00:03:55
    ladder
  • 00:03:56
    or it depends on the case you may use
  • 00:03:58
    the bold setup
  • 00:04:02
    k9 also have its own specification
  • 00:04:06
    rule number one this is a frontal view
  • 00:04:09
    the neck has to be out
  • 00:04:12
    and incisor of canine should be
  • 00:04:15
    inward this is rule number one
  • 00:04:19
    rule number two only measure half of the
  • 00:04:23
    facial surface should be shown from the
  • 00:04:25
    frontal view
  • 00:04:28
    rule number three the vertical
  • 00:04:32
    of canine from the sensitive view
  • 00:04:36
    should be perpendicular from the
  • 00:04:38
    occlusal plane
  • 00:04:45
    keep rule threes for the k9 setup
  • 00:04:50
    and then you try to arrange it
  • 00:04:54
    accordingly
  • 00:04:56
    once you complete all the entireties
  • 00:05:00
    symmetry should be achieved
  • 00:05:03
    from 6 to 11 t setup before you moving
  • 00:05:07
    on to the next
  • 00:05:08
    step mandibular entireties
  • 00:05:13
    will have a four different
  • 00:05:15
    specifications
  • 00:05:16
    that you need to look into
  • 00:05:20
    first one is a vertical overlap
  • 00:05:24
    that related to the maxillary
  • 00:05:27
    and mandibular teeth position
  • 00:05:31
    second specification is horizontal
  • 00:05:34
    overlap
  • 00:05:36
    you should have one millimeter space
  • 00:05:38
    between the lingual of the maxillary
  • 00:05:40
    incisor versus labial surface of the
  • 00:05:42
    lower incisor
  • 00:05:46
    and then third one is inclination
  • 00:05:48
    anterior posterior
  • 00:05:50
    and you could view by the sagittar plane
  • 00:05:54
    and last one is the inclination of long
  • 00:05:56
    axis of the piece
  • 00:05:57
    which will be perpendicular in this case
  • 00:06:02
    so these four parameters that you need
  • 00:06:04
    should
  • 00:06:05
    consider when you're setting up the
  • 00:06:06
    entirety of mandible
  • 00:06:10
    and again it's important to have the
  • 00:06:14
    vertical overlap and horizontal overlap
  • 00:06:16
    will be in relationship from
  • 00:06:20
    the maxillary teeth so you need to check
  • 00:06:22
    with the maxillary teeth
  • 00:06:24
    make sure you have one millimeter over
  • 00:06:27
    overlapping
  • 00:06:27
    particle and horizontal overlap which is
  • 00:06:30
    one millimeter space between maxillary
  • 00:06:32
    mandibular teeth
  • 00:06:36
    and then following the ladder incisor
  • 00:06:38
    will be
  • 00:06:40
    same as center incisor
  • 00:06:43
    but now you need to look at
  • 00:06:46
    maxillary center and ladder
  • 00:06:50
    in regarding the overlapping and the
  • 00:06:53
    last
  • 00:06:54
    t setup will be the canine
  • 00:06:58
    k9 also following the same particle
  • 00:07:02
    overlapping
  • 00:07:03
    that will be measured from the tip of
  • 00:07:05
    the canine
  • 00:07:07
    to the opposing dentition
  • 00:07:11
    so again vertical overlap horizontal
  • 00:07:14
    overlap will apply to
  • 00:07:16
    the canine ts also
  • 00:07:19
    again the important parameter will be
  • 00:07:21
    the symmetry
  • 00:07:24
    regarding posterior t setup posterior
  • 00:07:27
    tissues
  • 00:07:28
    comes in a group meaning four
  • 00:07:32
    posterities premolar
  • 00:07:33
    molar are all connected
  • 00:07:36
    attached together so you could move
  • 00:07:40
    without affecting occlusion
  • 00:07:44
    so the premolar start right next from
  • 00:07:46
    the canine
  • 00:07:47
    the height will be the same as the
  • 00:07:50
    canine tip
  • 00:07:51
    to the half of the parachute pad in the
  • 00:07:54
    posterior
  • 00:07:56
    this will determine the height of the
  • 00:07:58
    positivity's
  • 00:08:00
    position and then
  • 00:08:04
    there is a compensating curve built in
  • 00:08:07
    in posteriority setup
  • 00:08:09
    from the first molar disturbance
  • 00:08:13
    tip will be half a millimeter or above
  • 00:08:16
    medium accuracy and
  • 00:08:20
    another half millimeter incrementally
  • 00:08:22
    increased on the second
  • 00:08:24
    molar media vocal cords and the distal
  • 00:08:27
    buccal cluster will have another half a
  • 00:08:30
    millimeter
  • 00:08:30
    higher so it's over one and a half
  • 00:08:33
    millimeter higher
  • 00:08:35
    than the measure of
  • 00:08:38
    first smaller
  • 00:08:42
    so in posterity setup in group
  • 00:08:46
    when you move around the position and
  • 00:08:48
    angulation
  • 00:08:50
    it's move all together so you just need
  • 00:08:53
    to follow
  • 00:08:54
    the specification regarding the position
  • 00:08:57
    of the occlusal plane
  • 00:08:59
    and try to look it up between the
  • 00:09:01
    adjacencies
  • 00:09:03
    and the half of parasite pad
  • 00:09:06
    height and also the bucco lingually
  • 00:09:11
    the second molar central groove should
  • 00:09:14
    be in align with the
  • 00:09:16
    center line of pear-shaped pad
  • 00:09:21
    once you complete the setup or post your
  • 00:09:23
    teeth now
  • 00:09:24
    it's time to check the detail by
  • 00:09:27
    checking the
  • 00:09:28
    score you could see that which tees are
  • 00:09:31
    far
  • 00:09:31
    off from the ideal position by showing
  • 00:09:34
    the
  • 00:09:34
    red color and then change
  • 00:09:38
    minor adjustment to achieve better score
  • 00:09:42
    our goal is movement and rotation
  • 00:09:47
    should be above 90 percent
Etiquetas
  • configuració digital
  • Denka Academy
  • inclinació dental
  • pla oclusal
  • simetria dental
  • classe dental
  • caní dental
  • dents mandíbulars
  • configuració de centri