Cara ganti komstir jupiter z

00:07:20
https://www.youtube.com/watch?v=Cq-8zTbq4rE

Resumen

TLDRIn this video, the presenter shows how to change the komstir (steering head bearing) on a Yamaha Jupiter-Z motorcycle. The process begins with removing the old komstir by tapping it out with a hammer. The new komstir consists of two parts, which are installed using grease to facilitate the process. The presenter emphasizes the importance of ensuring the new parts are installed evenly and securely. After installation, the presenter checks for tightness and stability by taking the motorcycle for a test ride. Viewers are encouraged to engage with the video by liking, commenting, and subscribing for future updates.

Para llevar

  • 🔧 Remove the old komstir using a hammer.
  • 🛠️ Use grease to ease the installation of the new komstir.
  • ⚙️ Ensure the new parts are installed evenly.
  • 🔍 Check for tightness after installation.
  • 🚴‍♂️ Test ride to ensure stability and no wobble.

Cronología

  • 00:00:00 - 00:07:20

    In this video, the presenter demonstrates how to change the komstir (steering head bearing) on a Yamaha Jupiter-Z motorcycle. The process begins with removing the old komstir by tapping it with a hammer until it comes off. The presenter explains that there are two parts to the komstir, a larger and a smaller one, and emphasizes the importance of using a pipe to avoid damaging the new part during installation. After ensuring the new komstir is evenly inserted, the presenter tightens it securely and checks for any looseness. Finally, the video concludes with a reminder to like, comment, and subscribe for more content.

Mapa mental

Vídeo de preguntas y respuestas

  • What is a komstir?

    A komstir is a steering head bearing used in motorcycles.

  • What motorcycle model is featured in the video?

    The video features the Yamaha Jupiter-Z.

  • What tools are needed to change the komstir?

    Tools include a hammer, pipes for tapping, and grease.

  • How do you know if the komstir is installed correctly?

    Check for tightness and ensure there is no wobble when riding.

  • What should you do before starting the installation?

    Make sure to like, comment, and subscribe to the channel.

Ver más resúmenes de vídeos

Obtén acceso instantáneo a resúmenes gratuitos de vídeos de YouTube gracias a la IA.
Subtítulos
en
Desplazamiento automático:
  • 00:00:00
    Assalamu'alaikum friends in the video this time I want to change this komstir komstir I
  • 00:00:06
    want to change hers Yamaha jupiter-z yes before we go to the video do not forget to like comment
  • 00:00:15
    and subscribe so as not to miss the latest videos from our video so go see the video
  • 00:00:25
    Yes for the first one we let go here there is Gotri then we tap
  • 00:00:41
    it using a hammer in this way
  • 00:00:50
    Just tap, knock back and forth until this komstir comes off,
  • 00:00:59
    it looks like it's almost gone, let's just tap here until it comes off
  • 00:01:06
    And there's still a little more of this to remove the komstir it's usually very
  • 00:01:16
    difficult Now it's gone now, instead of
  • 00:01:26
    this for komstir there are two parts, one big one small and another for
  • 00:01:32
    the big one, the bottom is 1 pair for the first one we
  • 00:01:41
    use this feat, we use feat to make it a bit easier to enter
  • 00:01:51
    This is something like This is inserted later, this is the partner, but this is the former partner
  • 00:01:59
    , we put this in so as not to damage the new one we use these
  • 00:02:09
    pipes to put us tap-tap like this until it was apparently already entered
  • 00:02:21
    this should be evenly entered all do not tilt it
  • 00:02:32
    to parts of the partner who had masangnya here disasi like this
  • 00:02:43
    Report as rich had drummed it mate but the former we immediately tap tap wrote
  • 00:02:57
    this until blended Yes as it seems is already flat
  • 00:03:07
    look
  • 00:03:14
    then the top is small
  • 00:03:19
    we use a feat
  • 00:03:24
    that the inclusion of a rather simple
  • 00:03:29
    yes as earlier this partner for strum this but the former then
  • 00:03:42
    we love this feat for a pair komstir very
  • 00:03:51
    wasteful once feat because feat easy to dry we love that much
  • 00:04:01
    ya like spouses installed then for the part under us also love
  • 00:04:13
    this feat enter slug it
  • 00:04:22
    we love feat again that much as it was already a lot and then we direct input like this
  • 00:04:35
    Yes it is already entered then we close it then we install this baud there are two
  • 00:04:49
    later n we use it, tap it like this
  • 00:04:56
    until it's tight,
  • 00:05:01
    now it looks like it's a little tight Then
  • 00:05:15
    to tighten the top one
  • 00:05:29
    then we check again, it looks a little tight, yes it's not
  • 00:05:36
    loose, we tighten it a little more
  • 00:05:45
    to fasten the bottom one, like These then are the top dikencengin
  • 00:06:00
    like this so it seems already so we put this
  • 00:06:08
    rubber and then we assemble back
  • 00:06:18
    Yes this is already so sorry I skip
  • 00:06:21
    and then we try to check this first check like this if komstirnya slack is felt
  • 00:06:32
    once ngeceknya like this to establish us try check, take the road
  • 00:06:44
    , to check, take the road, we use
  • 00:06:46
    turns because if it's not normal, it really feels
  • 00:06:53
    like it's already done and it doesn't wobble
  • 00:06:58
    Eh, it's done, don't forget to like comment and subscribe so you
  • 00:07:09
    don't look like you don't miss the latest videos from us, hopefully it's useful
Etiquetas
  • Yamaha
  • Jupiter-Z
  • motorcycle
  • komstir
  • steering head bearing
  • installation
  • repair
  • mechanics
  • tutorial
  • how-to